5V4311 Caterpillar Style Compactor Finger Shank, Caterpillar spare parts Finger Shanks, Caterpillar Style Aftermarket Cleaner Bar Finger 5V-4311 Fits CAT 815B earthmoving compactor equipment 5V4311 Caterpillar Style Compactor Finger Shank Features: Caterpillar style finger shank for a compactor; it is 1.75″ thick, 305″ wide and 21.5″long Weight 21.16 lb / 9.6 kg Compatible Models earthmoving […]
KMAX Bucket Teeth Point System Komatsu Parts K20RP2 Rock Penetrator Tooth, Replacement Komatsu Tooth System, DIGGER BUCKET TEETH for Komatsu loader, K-MAX Bucket Teeth System Teeth Point, excavator bucket teeth, bucket tips, bucket tooth and adapter for sales China Supplier
KMAX Bucket Teeth Point System Komatsu Parts K20RP2 Bucket teeth and adapter
1. Material :high quality Carbon steel,alloy steel,Mn steel,high carbon steel.
2. Available for different type of loader by differnt joint way.
3. Min.Qty.: 1 ton
4. Package by nude pack.
We produce various kinds of construction machinery parts, like: hydraulic breaker, bucket assy, undercarriage, track roller, carrier roller, sprocket, idler,steel track assy, rubber track assy,track shoe, track link assy, teeth and adapter, side cutter, blade and edge, pump and so on.
Komatsu bucket teeth Kmax
K15RC K15T K15SYL K15RP2 K2025M15
K20RC K20T K20SYL K20RP2 K1030M20
K25RC K25T K25SYL K25RP2 K1040M25
K30RC K30T K30SYL K30RP2 K1045M30
K40RC K40T K40SYL K40RP2 K120040
K50RC K50T K50SYL K50RP2 K1060M50
K70RC K70T K70SYL K70RP2 K1070M70
K85RC K85T K85SYL K85RP2 K1080M85
XS115RC XS115T XS115SYL XS115RP2 350XS115
XS145RC XS145T XS145SYL XS145RP2
|Cate Style G.E.T||Part No.||Type||Weight||Pin&Lock|
|J225||6Y3222||Dirt Tooth||1.8 kg||6Y3228/8E6259|
|J250||1U3252||Dirt Tooth||3 kg||8E6258/8E6259|
|J250||1U3252RC||Rock Chisel Tooth||3.5 kg||8E6258/8E6259|
|J300||1U3302||Dirt Tooth||4.3 kg||9J2308/8E6259|
|J300||1U3302RC||Rock Chisel Tooth||4.7 kg||9J2308/8E6259|
|J350||1U3352||Dirt Tooth||6.2 kg||8E6358/8E6359|
|J350||1U3352RC||Rock Chisel Tooth||7 kg||8E6358/8E6359|
|J400||7T3402||Dirt Tooth||9.5 kg||7T3408/8E6409|
|J400||7T3402RC||Rock Chisel Tooth||10.5 kg||7T3408/8E6409|
|J450||9W8452||Dirt Tooth||11 kg||8E0468/8E8469|
|J450||9W8452RC||Rock Chisel Tooth||13.8 kg||8E0468/8E8469|
|J450||1U3452TL||Tiger Tooth||15.2 kg||8E0468/8E8469|
|J550||1U3552RC||Rock Chisel Tooth||23.2 kg||6Y8558/8E5559|
|J550||9W8552TL||Tiger Tooth||16.6 kg||6Y8558/8E5559|
|J225||6Y3224||Weld-On Adapter||2.5 kg||6Y3228/8E6259|
|J250||6Y3254||Weld-On Adapter||3.9 kg||8E6258/8E6259|
|J350||3G8354||Weld-On Adapter||9.8 kg||8E6358/8E6359|
|J400||6I6404||Weld-On Adapter||13.2 kg||7T3408/8E6409|
|J450||6I6464||Weld-On Adapter||20 kg||8E0468/8E8469|
|J550||6I6554||Weld-On Adapter||34 kg||6Y8558/8E5559|
|J350||096-4747/4748||Side Cutter||23 kg|
|J550||7Y0358/0359||Side Cutter||43 kg|
Tooth & adapter styles for most applications
Tooth is self sharpening
Better penetration and cycle times
Better tooth-adapter fit
Nose design reduces areas of stress under load
Safe & Easy Replacement
Hammerless pin for quicker changes
Choose the right retention system
The way you mount the tooth to the adapter(shank) can determine how firm the tooth will stay over time. It will also determin how easy the tooth is to replace when worn.
Flex pin – Horizontal:Flex pins are two steel forgings that have a neoprene rubber in between. As you pound the pin through, it squeezes the neoprene and that holds the tooth up on the adapter. Installed and removed properly, Flex pins can be re-used up to 10 times.
Flex pin – Diagonal (Rhombic System):Using a slightly longer flex pin than the horizontal mounting system. The Rhombic system mounts the tooth and flex pin at a 45 degree angle. This makes installation and removal as easy as the vertical system while providing the strength of the horizontal system.
Roll pin – vertical:This looks like a steel coil. The pin is pounded down through the top rather than through the side. Roll pins are not re-useable and must be replaced new with each tooth installation. K20RC Bucket Teeth Komatsu
Crimp on:The sides of the tooth itself are crimped into impressions on the adapter. This is a more cost-effective option for smaller less-powerful machines