DBF style Grader Flat Blade 4T2968, 4T-2968

DBF style Grader Flat Blade 4T2968, 4T-2968  5/8” X 8” X 6′ (13# 5/8”) Bolt, Motorgrader Bolt On Blade, Low Price DBF Grader Blades, CATERPILLAR Flat Grader Blade, CAT Genuine Parts Motorgrader Flat / Curved Double Bevel Blade, G.E.T Parts Boron Steel Center Blades with 6 holes, Through Hardened Heat Treated Cutting Edges for Motor Grader China Supplier

DBF style Grader Flat Blade 4T2968, 4T-2968 Specifications:
Part No. 4T2968, 4T-2968
Weight: 94 pounds 42 kg.
Information:
ABRASION RESISTANT MATERIAL N
BOLT HOLE SIZE 18 mm
CHAMFER EDGE
HOLE PATTERN OFFSET
HOLE SPACING 152.4 mm
LENGTH 1826.4 mm
NUMBER OF HOLES 13
THICKNESS 16 mm
TUNGSTEN CARBIDE N
WIDTH 203.2 mm

Compatible equipment models: 4T2968:
BLADE SNOW WING
MOTOR GRADER 12M 2 140M 14M 160M Caterpillar

Cat motor grader cutting edges provide the best balance of abrasion and impact resistance. Both Cat cutting edges and end bits are designed as a balanced system to move more material over a longer period with less downtime. This is accomplished by providing great strength for superior breakage resistance, and by offering maximum wear protection from both bottom and face wear on the cutting edge.

A longer bolt (6) and a thicker spacer (4) are used to fasten the sections of the exhaust manifold to the cylinder heads. See Illustration 2. This change will help maintain force that fastens the sections of the exhaust manifold to the cylinder heads.
Illustration 2 g00850650
This illustration shows the front view of a typical exhaust manifold group. (4) 203-2163 High Temperature Spacer (5) 5M-2894 Hard Washer (6) 5P-3875 Bolt (X) Exhaust Manifold (Y) Cylinder HeadAdaptable To: Two new 203-2143 Exhaust Manifold Sleeves (1) and one 127-8269 Exhaust Seal (3) replace each 1W-5499 Exhaust Manifold Sleeve in the Exhaust Manifold Groups that are identified in Table 1. Illustration 1 shows the locations of the new sleeves (1) and seals (3) in a typical exhaust manifold group.A new 203-2143 Exhaust Manifold Sleeve (2) replaces each 153-7474 Exhaust Manifold Sleeve in the Exhaust Manifold Groups that are identified in Table 1. Illustration 1 shows the locations of the new sleeves (2) in a typical exhaust manifold group. The 153-7474 Exhaust Manifold Sleeves can be reused if the inside diameter is enlarged. See Illustration 3 for the correct inside diameter.
Illustration 3 g00838928
This illustration shows a 153-7474 Exhaust Manifold Sleeve. Dimension (A) of the modified 153-7474 Exhaust Manifold Sleeve must equal 116.3 0.025 mm (4.58 0.0010 inch).One new 203-2163 High Temperature Spacer (4) and one new 5P-3875 Bolt (6) replace each 198-0230 High Temperature Spacer and 5P-3961 Bolt in the Exhaust Manifold Groups that are identified in Table 1. Illustration 2 shows the location of the new spacers and bolts in a typical exhaust manifold group. Apply a light coat of 4C-5598 High Temperature Anti-Seize to the threads of the bolts (6) before the bolts are installed. Tighten bolts (6) to a torque of 50 5 N m (37 4 lb ft).Note: Do not overtighten the bolts (6) that fasten the exhaust manifolds to the cylinder heads. The bolts may fail if the bolts are overtightened.Table 2 lists the effectivity of the new components in the machine engines.
Table 1
Identification Of Exhaust Manifold Groups
Machine Machine
S/N Part Number Of The Exhaust Manifold Group
Machines That Are Powered By 3508 Engines
D11N 4HK, 74Z 9Y-7673  CAT 4T2966 Center Bolt On Cutting Edge for Universal Grader
D11R 8ZR
776B 6JC
776C 2TK
777B 4YC, 3NF
777C 4XJ
5130 7TJ, 5ZL
D11R AAF, 9TR, 9XR, 7PZ 121-5731
776D 5ER, AFS
777C 4XJ  5J6965, 5J-6965 High Carbon Steel Double Bevel Flat Cutting Edge
777D AGC, 3PR
5130B 4CS
854G AMP, 1JW 115-0550
992G 7HR, ADZ
Machines That Are Powered By 3512 Engines
784B 5RK 2W-0212
785 8GB
785B 6HK
777D HAA 2YW, AGY 103-0940
784C 2PZ
785C 1HW, APX
797 5YW 155-0425
Machines That Are Powered By 3516 Engines
789 9ZC 2W-3708