Caterpillar 8E6464WN Replacement Weld-on Nose Specifications:
1.Part NO.: 8E6464WN
2.Net Weight: 19.84 lb / 9 kg
3.Color: yellow or as require
4.material: Alloy steel with Cr,Mn,Mo,Ni,…
5.Technique: Precision casting
6.Certification: ISO9001:2008, ISO14001
7.Outer Packing: Iron or wooden cartons
Caterpillar style weld on nose for a J460 series bucket tooth, takes an 8E0468 pin and an 8E8469 sleeved retainer
What are weld on noses?
If the nose wears out on your adapter, then you can opt to replace just the nose rather than the whole adapter, the nose piece is a lot cheaper, but you have more labor involved in replacing just the nose.
Ground Engaging Tools
Teeth. Adapters. Ripper Shanks. Cutting Edges. End Bits. Mounting Hardware.
Hydraulic Components
Pumps. Valves. Seals. Hoses.
Additional Items
Loader Linkage Pins. Bushings and Seals. Starters. Alternators. Electrical components. Swing Gears. Gauges. Oil Coolers. Air Conditioning Units. Filters. Hardware. Lines. Hydraulic and Engine Oil. O-Rings. Bearings. Grease. Paint.
Weld On Noses Adapter Details – Inches (mm)
| PART NO. | CAT TOOTH SERIES | DIMENISONS – Inches (mm) | WEIGHT | ||||
| A | B | C | D | LBS. | KGS. | ||
| 8J7525WN | J200 | 2-/16 (59) | 2-1/4 (57) | 15/16 (24) | 7/16 (11) | 2.5 est. | 1.1 est. |
| 6Y3224WN | J225 | 3-/16 (81) | 2-9/16 (65) | 1-1/8 (29) | 7/16 (11) | 3.8 est. | 1.7 est. |
| 9J4254WN | J250 | 3-1/4 (83) | 2-3/4 (70) | 1-1/8 (29) | 1/2 (13) | 5.1 | 2.3 |
| 9J4304WN | J300 | 3-1/2 (89) | 3-1/2 (89) | 1-1/2 (38) | 7/8 (22) | 8.8 | 3.9 |
| 9J4354WN | J350 | 4-3/8 (111) | 4 (102) | 1-1/4 (32) | 1/2 (13) | 10.7 | 4.8 |
| 7T3404WN | J400 | 5 (127) | 4-5/8 (117) | 1-3/8 (35) | 1/2 (13) | 15.2 | 6.9 |
| 3G4454WN | J450 | 5-1/8 (130) | 5 (127) | 1-1/2 (38) | 1/2 (13) | 19.3 | 8.8 |
| *8E6464WN | J460 | 5-1/8 (130) | 5 (127) | 1-1/2 (38) | 1/2 (13) | 19.8 | 9 |
| 9J4554WN | J550 | 5-1/2 (140) | 5-3/4 (146) | 1-3/4 (44) | 3/4 (19) | 29.6 | 13.4 |
| 616604WN | J600 | 7-1/8 (181) | 7-5/8 (194) | 1-7/8 (48) | 13/16 (21) | 53.0 | 24.0 |
* Larger pin diameter for oversize fastener
Mechanical Property of Our Products
| Category |
Material |
Tensile |
Yield |
Elongation |
Hardness |
Impact |
| ♦Teeth | SZ Series | >=1700Mpa | >=1500Mpa | 8% | HB 440–520 | >=21J |
| ♦Adapter | SZ Series | >=1400Mpa | >=1200Mpa | 9% | HB 380–400 | >=22J |
| ♦Sider Cutter | SZ Series | >=1700Mpa | >=1500Mpa | 8% | HB 440–520 | >=21J |
| ♦Cutting Edge | 30MnB | >=1670Mpa | >=1440Mpa | 9% | HB 440–520 | >=29J |
| ♦Cutting Edge | HN8 | >=1130Mpa | >=600Mpa | 7% | HB 280–320 | >7J |
| ♦End bit | 30MnB | >=1670Mpa | >=1440Mpa | 9% | HB 440–520 | >=29J |
| ♦End bit | 16Mn | >=670Mpa | >=320Mpa | 7% | HB 280–320 | >=21J |
| ♦Power Bolt | 40Cr | HB 380–420 | ||||
| ♦Power Nut | 45# | HB 380–420 |
Types of Welds and Their Symbols
Each type of weld has its own basic symbol, which is typically placed near the center of the reference line (and above or below it, depending on which side of the joint it’s on). The symbol is a small drawing that can usually be interpreted as a simplified cross-section of the weld. The examples below show the most common types of welds that may be utilized on our products. They are shown in both arrow-side and other-side position and how they would appear in a complete weld symbol.
This is not meant to be an all-inclusive list of weld symbols. The complete set of symbols is given in a standard published by American National Standards Institute (ANSI) and the American Welding Society (AWS): ANSI/AWS A2.4, Symbols for Welding and Nondestructive Testing. Replacement Weld-on Nose
BOLT-ON CENTER EDGES 9W8215 (X2) 4T8077 (X1) 1U0295 (X2) 1U0295 (X2) 1U0295 (X2) 4T8796 (X1) 4T2920 (X1) 4T2913 (X1) 1U0607 (X2) 1U1465 (X1) 4T2911 (X1) 4T2919 (X2) 9W9943 (X1) 4T2920 (X1) 4T2915 (X1) 1U0292 (X2) 1U0292 (X2) 1U0292 (X2) 1U0605 (X2) 1U0605 (X2) 1U1467 (X2) 1U0295 (X2) 1U0295 (X2) 1U0294 (X2) 1U0294 (X2) 1U0293 (X2) 1U0293 (X2) 1U1465 (X1) 1U2414 (X2) 1U2414 (X2) 1U2412 (X2) 1U2413 (X2) 1U2413 (X2) 1U1470 (X1) 1U0601 (X2) 1U0601 (X2) 1U0601 (X2) 7T5963 (X1) & 7T5962 (X1) & 7T5961 (X1) 1U2410 (X2) 1U1471 (X2) 1U2410 (X2) 1U2411 (X2) 1U0599 (X2) 1U0599 (X2) 1U0600 (X2) 1U0600 (X2) 6Y3224WN Replacement Cat Bucket Tooth Nose
| EXCAVATOR SPECIFICATON | TOOTH SERIES | ADAPTERS | WELD-ON NOSES | SIDECUTTERS | MACHINE MODEL | ||||||||
| MACHINE MODEL | STICK | BUCKET | CENTER | LEFT HAND | RIGHT HAND | BLADE TYPE SIDECUTTERS | COMBINATION PLATE | ||||||
| RIGHT HAND | LEFT HAND | PLOW BOLT ASSY | PLATE | PLOW BOLT ASSY† | |||||||||
| D3416, 426428, 436 | General Purpose | J200 | 8J7525 (BottomLeg119-3204 (Wrap Around) | 8J7525WN | D3, 416, 426, 428, 436 |
||||||||
| 446, E70B | J225 | 6Y3224 | 6Y3224WN | 446, E70B | |||||||||
| E110B, 120B | General Purpose | J250 | 6Y3254 | 9J4254WN | E110B, 120B, | ||||||||
| E180B, E220 | General Purpose | J300 | 9W1304 | 9J4304WN | 9J1855R | 9J1856L | 434-12(3) | E180B, E220 | |||||
| Heavy Duty | J350 | 616354 | 9J4354WN | ||||||||||
| 205, 206, 211, 212, 213, 214 | General Purpose | J250 | 3G0169 | 9J4254WN | 205, 206, 211, 212, 9J4304WN 213, 214 |
||||||||
| Heavy Duty | J300 | 9J8929 | 9J4304WN | ||||||||||
| 213B, 214B | General Purpose | J300 | 9J8929 | 9J4304WN | 213B, 214B | ||||||||
| 215, 219 | General Purpose | J300 | 3G6304C | 3G6306L | 3G6405R | 9J4304WN | 9J1855R | 9J1 B56L | 434-212 (3) | 215, 219 | |||
| Heavy Duty | J350 | 3G8354C | 3G8356L | 3G8355R | 9J4354WN | ||||||||
| 224 | General Purpose | J300 | 9J8929 | 9J4304WN | 224 | ||||||||
| 225 | Backhoe & Mass Excavating | J350 | 3GB354C | 3G8356L | 3G8355R | 9J4354WN | 8J9615R | 8J9614L | A10-300 (3) | 4T2886B | A34-314 (4) | 225 | |
| Heavy Duty | J450 | 8J9141C | 8J9140L | 8J9139R | 3G4454WN | ||||||||
| 227, 229 | Backhoe & Mass Excavating | J350 | 3G8354C | 3G8356L | 3G8355R | 9J4354WN | 227, 229 | ||||||
| 235 | Backhoe & Mass Excavating | J450 | 8J9141C | 8J9140L | 8J9139R | 3G4454WN | 8J9615R | 8J9614L | A10-300 (3) | 4T2886B | A34-314 (4) | 235 | |
| J460 | 8E6464C | 8E6466L | 8E6465R | 8E6464WN | |||||||||
| Heavy Duty | J550 | ||||||||||||
| E240, EL240 | J350 | 616354 | 616356 | 616355 | 9J4354WN | 8J9615R | 8J9614L | 410-300 (3) | 4T2886B | A34-314 (4) | E240, EL240 | ||
| 245 | Backhoe & Mass Excavating | J550 | 9J0174C | 9J0173L | 9J0172R | 9J4554WN | 8J9B25R | 8J9826L | A10-312 (5) | 4T6664P | 434-314 (4) | 245 | |
| Front Shovel | 3G9494C | 3G9496L | 3G9495R | ||||||||||
| 311, 312 | General Purpose | J250 | 6Y3254 | 9J4254WN | 311, 312 | ||||||||
| 318, 320, 320L | 6′-3′ Short 9 -7′ 8-2 STD12-8 Long | 35T, 36T, 39T, 42T, 44X, 47X, 50X, 54X | J300 | 8E9490 | 9J4304WN | 318, 320, 320L | |||||||
| 24ET, 30ET, 43EX, 44ET | J350 | 6I6354 | 6I6356 | 6I6355 | 9J4354WN | 8J9615R | 8J9614L | A10-300 (3) | 4T2886B | A54-314 (4) | |||
| 320ME | 6-3, 7-10-Short | 30ET, 32ET, 37ET, 47EX, 54EX | J400 | 7T3404C | 6I6406 | 6I6405 | 7T3404WN | 8J9615R | 8J9614L | A10-300 (3) | 4T2886B | 434-314 (4) | 320ME |
| 322L, 325, 325L | 13-3 Long | J300 | 8E9490 | 9J4304WN | 8J9615R | 8J9614L | A10-300 (3) | 4T2886B | A34-314 (4) | 322L, 325, 325L | |||
| 8-8, 10-6, STD | 31T, 36T, 42T, 48T, 53X, 54X, 54T, 57MX | J350 | 6I6354 | 6I6356 | 6I6355 | 9J4354WN | |||||||
| 6-7, 8-3 – Short | 30ET, 36ET, 51EX, 57EMX | J460 | 8E6E6EC | 8E6466L | 8E6465R | 8E6464WN | |||||||
| 330, 330L | 15-9 Long | 31T, 36T, 42T, 48T, 53X, 54X, 54T, 57MX | J350 | 6I6354 | 6I6356 | 6I6355 | 9J4354WN | 8J9615R | 8J9614L | A10-300 (3) | 4T2886B | A34-314 (4) | 330, 330L |
| 30ET, 32ET, 37ET, 46EX, 54EMX | J400 | 7T3404C | 6I6406 | 6I6405 | |||||||||
| 9-2 STD10-10 STD11 -6 STD12-10 STD | 42T, 48T, 54T, 56X, 59X, 60MX | J400 | 7T3404C | 6I6406 | 6I6405 | 7T3404WN | |||||||
| 30ET, 36ET, 51EX, 57EMX | J460 | 8E6464C | 8E6466L | 8E6455R | 7T3404WN | ||||||||
| 35R | |||||||||||||
| 8-4 Short | 63X, 68MX | 8E6464C | 8E6466L | 8E6455R | 8E6464WN | 8J9825R | BJ9826L | 410-312 (5) | 4T6664P | A34-314 (4) | |||
| 59EX, 64EMX | J550 | 6I6554C | 6I6556L | 6I6555R | 9J4554WN | ||||||||
| 350, 350L | J460 | 8E6464C | 8E6466L | 8E646465R | 8E6464WN | 8J9825R | BJ9826L | A10-312 (5) | 4T6664P | A34-314 (4) | 350, 350L | ||
| 375, 375L | J550 | 6I6554C | 6I6556L | 6I6555R | 9J4554WN | ||||||||
| 14-5, 18-1 Long | 54T, 60T, 71X | J550 | 6I6554C | 6I6556L | 6I6555R | 9J4554WN | 8J9826R | 8J9826L | A10-312 (5) | 4T6664P | A34-314 (4) | 375, 375L | |
| 42ET, 48ET | J600 | 6I6604C | 6I6606 | 6I6605 | 616604WN | ||||||||
| 9-7 STD11-2 STD13-5 STD | 60T, 66T, 80X, 87X, 94MX | ||||||||||||
| 81V, 88VMX | |||||||||||||
9V4370, 9V-4370 CAT 990 II LOADER BASE BLADE, Wheel Loader Replacement Centre Blades, Bucket Center Base Edge, Caterpillar Style Track Loader Replacement Cutting Edge, Bolt on Bucket Single Beveled Central Base Edges China Factory Supplier Expoter 9V4370, 9V-4370 CAT 990 II LOADER BASE BLADE Feature: CAT Part No.: 9V4370 , 9V-4370 Type: Base Edge […]
9V4650, 9V-4650 CAT LOADER BLADES, Wheel Loader Replacement Centre Blades, Bucket Center Base Edge, Caterpillar Style Track Loader Replacement Cutting Edge, Bolt on Bucket Single Beveled Central Base Edges China Factory Supplier Expoter 9V4650, 9V-4650 CAT LOADER BLADES Feature: CAT Part No.: 9V4650 , 9V-4650 Type: Base Edge DELTA BLADE 50 X 575 X […]
9V6570, 9V-6570 943, 953 TRACK LOADER Base Edge, Wheel Loader Replacement Centre Blades, Bucket Center Base Edge, Caterpillar Style Track Loader Replacement Cutting Edge, Bolt on Bucket Single Beveled Central Base Edges China Factory Supplier Expoter 9V6570, 9V-6570 943, 953 TRACK LOADER Base Edge Feature: CAT Part No.: 9V6570 , 9V-6570 Type: Base Edge […]
9V6571 9V-6571 943 TRACK LOADER Bucket Base Edge, Wheel Loader Replacement Centre Blades, Bucket Center Base Edge, Caterpillar Style Track Loader Replacement Cutting Edge, Bolt on Bucket Single Beveled Central Base Edges China Factory Supplier Expoter 9V6571 9V-6571 943 TRACK LOADER Bucket Base Edge Feature: CAT Part No.: 9V6571 , 9V-6571 Type: Base Edge […]
9V6572 9V-6572 953C 926 Loader Bucket Base Edge, Wheel Loader Replacement Centre Blades, Bucket Center Base Edge, Caterpillar Style Track Loader Replacement Cutting Edge, Bolt on Bucket Single Beveled Central Base Edges China Factory Supplier Expoter 9V6572 9V-6572 953C 926 Loader Bucket Base Edge Feature: CAT Part No.: 9V6572 , 9V-6572 Type: Base Edge […]
9V6573 9V-6573 938G, 938H, 950F Loader Base Edge, Wheel Loader Replacement Centre Blades, Bucket Center Base Edge, Caterpillar Style Track Loader Replacement Cutting Edge, Bolt on Bucket Single Beveled Central Base Edges China Factory Supplier Expoter 9V6573 9V-6573 938G, 938H, 950F Loader Base Edge Feature: CAT Part No.: 9V6573 , 9V-6573 Type: Base Edge […]
9V6574 9V-6574 973C, 980C, 980F Loader Base Edge, Wheel Loader Replacement Blades, Center Base Edge, Caterpillar Style Track Loader Replacement Cutting Edge, Bolt on Bucket Single Beveled Base Edges China Factory 9V6574 9V-6574 973C, 980C, 980F Loader Base Edge Feature: CAT Part No.: 9V6574 , 9V-6574 Type: Base Edge SHOVEL BLADE 45 X 305 […]
Fabco Bucket Tooth Adapter Kit, Fabricated Bucket Tip Adaptor, H&L Style Bucket Digging Teeth Bucket Tooth Adapters & Flex Pins, Fabco Standard Tooth Point Adaptor, Fabco Weld on Wrap Around Adapter, DIRT TOOTH HOLDER, Loader Excavator Bucket Tooth System, Replacement H&L Bucket Shank China Supplier & Factory Fabco Bucket Tooth Adapter Kit Feature: Part No.: […]
