CAT Motor Tractor Blade 9W2329, 9W-2329 6 Holes 3/4″ Bolt

  • CAT Motor Tractor Blade 9W2329, 9W-2329 6 Holes

CAT Motor Tractor Blade 9W2329, 9W-2329 6 Holes 3/4″ Bolt, Motorgrader Bolt On Blade, Low Price Dbc Grader Blades, CATERPILLAR Curved Grader Blade, CAT Genuine Parts Motorgrader Curved Double Bevel Blade, G.E.T Parts Boron Steel Center Blades with 6 holes, Through Hardened Heat Treated Cutting Edges for Motor Grader China Supplier

CAT Motor Tractor Blade 9W2329, 9W-2329 6 Holes 3/4″ Bolt  Specifications:
Part No.    9W2329, 9W-2329

A 203mm Material HIGH CARBON
B 16mm Diameter 3/4″
C 1219mm Tooth
D Holes 6
E Class
Weight 28Kg

Cutting Edges
• Complete line of curved double bevel (CDB) cutting edges for every make and model
• CDB sizes range from 1/2″ x 6″ for light grading up to heavy-duty 1″ x 8″ CDB section for greater wear life
• Flame-hardened grader cutting edges with surface hardness up to 62 RC, provides max mum wear resistance
• XHD flat grader blades are available in sizes 3/4″ x 8″ through 3″ x 16″ FDB
• Select serrated grader blades are available for frozen or hard packed ground conditions

End Bits
• HCEParts end bits and overlay end bits help protect the moldboard, while extending the life of cutting edges. End bits are available in standard and heavy-duty.
• Drop forged, triple alloy steel shanks fit precisely providing maximum strength and resistance to shock

Scarifier Shanks and Tips
• Tips are made with a tough alloy, offering maximum wear and economic value
• Tips available in rectangle and oval slot designs

1. Use tool (A) as shown to make sure the fuel injection rack will move freely by its own weight when injector (1) is turned a total of 180° in both directions. Check the rack movement with the injector spring under compression in several positions.
To prevent a carbon deposit between the injector and the injector bore, make sure the injector body (especially the tapered area) and the injector bore are clean and free of foreign material.  9W2323, 9W-2323 Caterpillar Motor Grader Blade 16 Holes 5/8″ Bolts Motor Tractor Blade
2. Make sure the three O-ring seals (2) are installed in injector (1), and put 5P960 Multipurpose Grease on the seals and in the bore in the injector.3. Make sure the plug that the anvil of clamp (3) sets on is installed in the top of the cylinder head assembly. Put clean engine oil on the plug and the anvil of clamp (3).
Do not tap or hit on the injector follower to install the injector. Damage and failure of the injector can be the result. 5D9731, 5D-9731 Ground Engaging Tools Motor Grader 16 Blades Motor Tractor Blade
4. Put injector (1) in position in the cylinder head assembly. Install clamp (3), and tighten the bolt and washer to push injector (1) all the way into its bore. Tighten the bolt to a torque of 65 7 N m (48 5 lb.ft.).5. Check to make sure the fuel injection rack moves freely by hand in the injector after the injector is installed.6. Put lever assembly (4) in position. Connect the lever assembly to control rod (5), and make sure lever assembly (4) is engaged correctly with the fuel injection rack. Install the two bolts to hold the lever assembly in place.7. See Testing And Adjusting module for the correct adjustment of the fuel injection control group. Make sure the control group can move to the fuel  5D9732, 5D-9732 HB500 Through Hardened Curved Grader Blade

Start By:a. remove exhaust manifold The exhaust manifolds do not have to be removed unless all the cylinder head assemblies are to be removed.1. Drain the coolant from the cooling system.2. Shut off the fuel supply on the engine. 3. Remove fuel lines (2), thermocouple (1) and the fuel line manifold from the cylinder head assembly. 4. If equipped, disconnect hose assembly (4) from water manifold (3) 7T1641, 7T-1641 Caterpillar Machine Grader Curved Edges. Remove the bolts to remove a section of water manifold (3) and elbow (6) from the cylinder head assembly.5. Remove bracket (5) from the cylinder head assembly. Air inlet elbow (7) does not have to be removed from the cylinder head assembly, only the bolts that hold the elbow to the cylinder head assembly.6. Remove the bolts, and remove air inlet elbow (7) from the cylinder head assembly. 7. Remove the access cover from under the cylinder head assembly. Remove the bolt and cap (9) to disconnect rod assembly (8) from fuel control shaft (10).8. Remove the rocker shaft assemblies and push rods. See Remove Rocker Shaft Assemblies And Push Rods for this procedure. 9. Remove bolts (14) to remove lever assembly (13) and rod assembly (8) as a unit from the cylinder head assembly. If the lower end of rod assembly (8) does not have enough clearance to be removed, use tool (A) to turn the flywheel until the lower end of rod assembly (8) can be removed between the camshaft and engine block.10. Remove the bolt and clamp (12) from the fuel injector.

  • Affordable Price
  • OEM Parts Available
  • Payment Easy
  • Worldwide Delivery
  • Quality Guaranteed
  • Bulk Discount

Product Range

Part Number Measurement (mm) Description Brand Weight(Kgs)
232-70-12142 1828mmX152mmX13mm  5/8″X8 DBC Grader Blades Komatsu 24
4T3512 1219mmX203mmX25mm  3/4″X9 DBC Grader Blades CAT 45
7T1627 2438mmX203mmX19mm  3/4″X17 DBC Grader Blades CAT 67
7T1625 2133mmX203mmX19mm  3/4″X15 DBC Grader Blades CAT 59
7T1638 1828mmX203mmX19mm  3/4″X13 DBC Grader Blades CAT 50
9W2341 1524mmX203mmX19mm  3/4″X11 DBC Grader Blades CAT 42
9W2339 1219mmX203mmX19mm  3/4″X9 DBC Grader Blades CAT 33.5
7T1630 2438mmX203mmX19mm  5/8″X17 DBC Grader Blades CAT 67
7T1623 2133mmX203mmX19mm  5/8″X15 DBC Grader Blades CAT 59
7T1634 1828mmX203mmX19mm  5/8″X13 DBC Grader Blades CAT 50
9W2340 1524mmX203mmX19mm  5/8″X11 DBC Grader Blades CAT 42
9W2338 1219mmX203mmX19mm  5/8″X9 DBC Grader Blades CAT 33.5
7T1628 2438mmX203mmX16mm  3/4″X17 DBC Grader Blades CAT 56
7T1624 2133mmX203mmX16mm  3/4″X15 DBC Grader Blades CAT 49
7T1639 1828mmX203mmX16mm  3/4″X13 DBC Grader Blades CAT 42
9W2329 1219mmX203mmX16mm  3/4″X9 DBC Grader Blades CAT 28
7T1631 2438mmX203mmX16mm  5/8″X17 DBC Grader Blades CAT 56
7T1643 2133mmX203mmX16mm  5/8″X15 DBC Grader Blades CAT 49
7T1636 1828mmX203mmX16mm  5/8″X13 DBC Grader Blades CAT 42
Part Number Measurement (mm) Description Weight(Kgs)
7T1643 2133mmX203mmX16mm  5/8″X15 DBC Grader Blades 49
7T1636 1828mmX203mmX16mm  5/8″X13 DBC Grader Blades 42
7T1641 1524mmX203mmX16mm  5/8″X11 DBC Grader Blades 35
9W2328 1219mmX203mmX16mm  5/8″X9 DBC Grader Blades 28
3G1628 2438mmX203mmX13mm  3/4″X17 DBC Grader Blades 45.5
3G1627 2133mmX203mmX13mm  3/4″X15 DBC Grader Blades 40
3G1626 1828mmX203mmX13mm  3/4″X13 DBC Grader Blades 34
134-1779 1524mmX203mmX13mm  3/4″X11 DBC Grader Blades 28
135-6738 1219mmX203mmX13mm  3/4″X9 DBC Grader Blades 23
8J8980 2438mmX203mmX13mm  5/8″X17 DBC Grader Blades 45.5
8D2789 2133mmX203mmX13mm  5/8″X15 DBC Grader Blades 40
8D2788 1828mmX203mmX13mm  5/8″X13 DBC Grader Blades 34
9J3863 1524mmX203mmX13mm  5/8″X11 DBC Grader Blades 28
3G7965 1219mmX203mmX13mm  5/8″X9 DBC Grader Blades 23
9W2335 2133mmX152mmX19mm  3/4″X15 DBC Grader Blades 42
7T1644 2133mmX152mmX19mm  5/8″X15 DBC Grader Blades 42
7T1635 1828mmX152mmX19mm  5/8″X13 DBC Grader Blades 35.5
7T1642 1524mmX152mmX19mm  5/8″X11 DBC Grader Blades 30
7T1629 2438mmX152mmX16mm  3/4″X17 DBC Grader Blades 39
7T1626 2133mmX152mmX16mm  3/4″X15 DBC Grader Blades 34
7T1637 1828mmX152mmX16mm  3/4″X13 DBC Grader Blades 29
7T1632 2438mmX152mmX16mm  5/8″X17 DBC Grader Blades 39
7T1645 2133mmX152mmX16mm  5/8″X15 DBC Grader Blades 34
5B5562 2133mmX152mmX16mm  5/8″X9 DBC Grader Blades 34
7T1633 1828mmX152mmX16mm  5/8″X13 DBC Grader Blades 29
7T1640 1524mmX152mmX16mm  5/8″X11 DBC Grader Blades 25
9W2302 2438mmX152mmX13mm  3/4″X17 DBC Grader Blades 31.5
9W2300 2133mmX152mmX13mm  3/4″X15 DBC Grader Blades 28
9W2298 1828mmX152mmX13mm  3/4″X13 DBC Grader Blades 24
9W2301 2438mmX152mmX13mm  5/8″X9 DBC Grader Blades 31.5
9W2299 2133mmX152mmX13mm  5/8″X15 DBC Grader Blades 28
error: Copy Prohibited HCEPARTS!