Caterpillar Style Non-Reversible Center Segment Edge Protection 100-6668NR, Caterpillar Style Bolt On Center Segment, Track Loader & Wheel Loader Segment Edge, Caterpillar Segment Edge, CAT Replacement Bolt-On Segments China Factory Non-Reversible Center Segment 100-6668NR Feature: Part No.: 100-6668NR Type: Loader Segment Edge Protection Material: High carbon steel or Boron steel Compatible Machine Models: CAT Loader TRACK […]
CAT EXCAVATOR ROLLERS 302.5C 303CCR 266-8793, Track Roller CATERPILLAR Friction Welding Bottom Track Roller, Caterpillar Dozer Excavator Track Rollers, Dozer Undercarriage Parts, flanged track roller, bulldozer track rollers, Replacement Cat style Roller Carrier, Undercarriage Parts, OEM Earthmoving Spare Parts Bottom Roller Track Rollers for Caterpillar D20 supplier from China
CAT EXCAVATOR ROLLERS 302.5C 303CCR 266-8793 Detail Information
Product Bottom / Track Roller
Quantity Per Machine 6
Part Number 266-8793
Quality:Heat Treatment HRC 40-55
Color:Black Or Yellow
Warranty Time:12-18 Months
Shipment:By Air, Ship
High Light:flanged track roller, bulldozer track rollers
This is the aftermarket bottom roller for the following Caterpillar® mini excavators:
Cat 303 CCR
This roller comes with a twelve month prorated warranty so you can shop online with confidence. We offer same day shipping at no extra charge. These Caterpillar® track rollers do not come with the bolts required for installation.
This roller is known to fit serials: GBB3399- above.
Alternate Part Number:
Caterpillar dealer part number: 266-8793
Caterpillar: All Above Models
Alternate Part: This roller is known to fit serials: GBB3399- above.
CATERPILLAR® 303C-CR UNDERCARRIAGE PARTS
Cat 303C-CR Sprockets 264-5371
Cat 303C-CR Rollers 266-8793
Cat 303C-CR Top Rollers 266-8794
Cat 303C-CR Idlers 267-4829
CAT 302.5C UNDERCARRIAGE PARTS
Top Rollers 146-6064
Bottom Rollers 266-8793
This maintenance free Bottom Roller was made of the highest quality hardened steel with sealed bearings to protect them from foreign debris, manufactured to exact OEM specs providing you dependable service while operating in the most extreme conditions.
The HCE PARTS undercarriage product line serves both the heavy equipment and industrial markets with rubber track machinery such as Excavators, Mini Excavators, Compact Track Loaders, Mini Skid Steers, and Mini Dozers. We offer one of the most dependable complete range of Rollers, Drive Sprockets, and Idler Wheels in the industry.
Track rollers /386-0791/ are an essential part of the overall undercarriage system as they carry a whole host of tracked machines. The size of the rollers is selected so that the machine can work without any problems in normal working mode. And the temperature resulting from prolonged loading is safely removed from all components (bearings, seals, etc.). Bottom Track Roller for CAT Excavator 302.4D
The maximum resistance to abrasion of the rollers is achieved thanks to appropriate castings, precise machining and induction hardening. Moreover, good parameters are obtained thanks to tempering, increasing durability and extending the life of the rollers through their even wear.
Premature failure of the rollers /386-0791/ may be caused by their uneven load. E.g. when working with rollers that are worn to varying degrees (when they were not completely replaced during repair work). CAT Track Roller 301.7D (381-3040)
What’s more, the rollers also degrade when driving at higher speeds for longer. Then there are leaks, from which oil leaks, which leads to incorrect lubrication of the bearings, and this leads to failure of the rollers. If the track rollers lack the right amount of oil, the bearings get stuck and are not able to rotate around their axis inside the roller. As a result they are seriously damaged. Bottom Roller For CAT CAT Excavator Bottom Roller 302.4D, 386-0791
Track rollers /386-0791/ with leaking or blocked bearings should be replaced immediately to prevent damage to other track components, such as the link chain, because non-rotating rollers lead to rapid wear of the track chains. This is due to an increase in the frictional force on the roller shell and the contact surface of the chains.
|Brand||Model||Main Dimensions of Installation|