9V4370, 9V-4370 CAT 990 II LOADER BASE BLADE, Wheel Loader Replacement Centre Blades, Bucket Center Base Edge, Caterpillar Style Track Loader Replacement Cutting Edge, Bolt on Bucket Single Beveled Central Base Edges China Factory Supplier Expoter 9V4370, 9V-4370 CAT 990 II LOADER BASE BLADE Feature: CAT Part No.: 9V4370 , 9V-4370 Type: Base Edge […]
CAT 9J3657, 9J-3657 Earth Moving Equipment Cutting Edge 16mm 13# 3/4″ Bolt, Motorgrader Bolt On Blade, Low Price Dbc Grader Blades, CATERPILLAR Curved Grader Blade, CAT Genuine Parts Motorgrader Curved Double Bevel Blade, G.E.T Parts Boron Steel Center Blades with 6 holes, Through Hardened Heat Treated Cutting Edges for Motor Grader China Supplier
CAT 9J3657, 9J-3657 Earth Moving Equipment Cutting Edge 16mm Specifications:
Part No. 9J3657, 9J-3657
A 152mm Material HB500
B 16mm Diameter 3/4″
C 1828,4mm Tooth
D Holes 13
Cat motor grader cutting edges provide the best balance of abrasion and impact resistance. Both Cat cutting edges and end bits are designed as a balanced system to move more material over a longer period with less downtime. This is accomplished by providing great strength for superior breakage resistance, and by offering maximum wear protection from both bottom and face wear on the cutting edge.
Manufactured from steel with properties that maintain hardness for long wear life, our durable cutting edges make it possible for your machines to deliver the performance you demand. Protect your investment by always choosing genuine Cat Ground Engaging Tools.
• Impact and abrasion resistance
• High productivity in any application
• 12’ Blades
• ¾” Bolt Holes
• Developing roads
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, “Dealer Service Tool Catalog” for tools and supplies suitable to collect and contain fluids on Cat® products.Dispose of all fluids according to local regulations and mandates.
Illustration 1 g03819062 8D2789, 8D-2789 CAT Edge Cutting Grader Blade
Location of Hydraulic Oil Filter
Illustration 2 g03819066
(1) Type 1 Filter
(2) Type 2 Filter
Open the engine access door. Refer to “Access Doors and Covers”. 8J7782, 8J-7782 CAT Style Motor Grader Edges
Remove the Hydraulic tank filler cap. Refer to “Hydraulic System Oil Level – Check”.
Remove drain plug from bottom of filter housing (canister) to drain oil from the housing. Drain into a suitable container.Note: Use sockets or box end wrenches when servicing the hydraulic oil filter. Do not use an air wrench, open-end wrenches, or an adjustable wrench.
Unscrew canister from filter mounting base. Filter element will come out with housing. Discard the filter element.Note: For Type 2 Filter (2) squeeze the two tabs on filter element to unlatch it from the canister. 9J3655, 9J-3655 China Curved Grader Blade
Inspect the O-ring or O-rings on the canister or mounting base for damage and replace them if needed.
Clean the inside of the filter mounting base and clean the inside of the canister. 8J8980, 8J-8980 Curved Cutting Edge fits Caterpillar
Apply a thin coat of oil to the O-ring on the new filter element and the O-ring or O-rings on the canister or mounting base.
Insert the new filter element in the canister.Note: For Type 2 Filter (2), ensure that the two tabs are latched onto the side of the canister.