CAT 9J3656, 9J-3656 Earth Moving Equipment Double Bevel Curved Blade

  • CAT 9J3656, 9J-3656 Earth Moving Equipment Double Bevel Curved Blade

CAT 9J3656, 9J-3656 Earth Moving Equipment Double Bevel Curved Blade 17# 3/4″ Bolt, Motorgrader Bolt On Blade, Low Price Dbc Grader Blades, CATERPILLAR Curved Grader Blade, CAT Genuine Parts Motorgrader Curved Double Bevel Blade, G.E.T Parts Boron Steel Center Blades with 6 holes, Through Hardened Heat Treated Cutting Edges for Motor Grader China Supplier

CAT 9J3656, 9J-3656 Earth Moving Equipment Double Bevel Curved Blade Specifications:
Part No. 9J3656, 9J-3656
OEM
9J3656
Manufacturer
Caterpillar
Machine
Grader

A 152mm Material HB500
B 13mm Diameter 3/4″
C 2438mm Tooth
D Holes 17
E Class
F
G
R
Weight 31,4Kg

Cutting Edges
• Complete line of curved double bevel (CDB) cutting edges for every make and model
• CDB sizes range from 1/2″ x 6″ for light grading up to heavy-duty 1″ x 8″ CDB section for greater wear life
• Flame-hardened grader cutting edges with surface hardness up to 62 RC, provides max mum wear resistance
• XHD flat grader blades are available in sizes 3/4″ x 8″ through 3″ x 16″ FDB
• Select serrated grader blades are available for frozen or hard packed ground conditions

Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, “Dealer Service Tool Catalog” for tools and supplies suitable to collect and contain fluids on Cat® products.Dispose of all fluids according to local regulations and mandates.
Illustration 1 g03819062 8D2789, 8D-2789 CAT Edge Cutting Grader Blade
Location of Hydraulic Oil Filter
Illustration 2 g03819066
(1) Type 1 Filter
(2) Type 2 Filter
Open the engine access door. Refer to “Access Doors and Covers”.  8J7782, 8J-7782 CAT Style Motor Grader Edges
Remove the Hydraulic tank filler cap. Refer to “Hydraulic System Oil Level – Check”.
Remove drain plug from bottom of filter housing (canister) to drain oil from the housing. Drain into a suitable container.Note: Use sockets or box end wrenches when servicing the hydraulic oil filter. Do not use an air wrench, open-end wrenches, or an adjustable wrench.
Unscrew canister from filter mounting base. Filter element will come out with housing. Discard the filter element.Note: For Type 2 Filter (2) squeeze the two tabs on filter element to unlatch it from the canister.
Inspect the O-ring or O-rings on the canister or mounting base for damage and replace them if needed.
Clean the inside of the filter mounting base and clean the inside of the canister. 8J8980, 8J-8980 Curved Cutting Edge fits Caterpillar
Apply a thin coat of oil to the O-ring on the new filter element and the O-ring or O-rings on the canister or mounting base.
Insert the new filter element in the canister.Note: For Type 2 Filter (2), ensure that the two tabs are latched onto the side of the canister.

More
  • Affordable Price
  • OEM Parts Available
  • Payment Easy
  • Worldwide Delivery
  • Quality Guaranteed
  • Bulk Discount

Product Range

Imperial

CUTTING EDGES
3G6289
4T6386
8K8162
9J9606
9W6608
9W6615
8294269
8294669
8294271
8294669
11082664-11
11082666-6
100-4015
100-4043
100-4044
100-6356
100-6664
100-6666
100-6668
10120745
10120752
10120757
CUTTING EDGES
138-6472
139-9230
140-0983
140-2187
140-6862
140-6863
140-6864
140-6865
140-6866
140-6867
140-6868
140-6869
140-6870
140-7601
140-80-00001
140-80-00006
144-70-11131
144-871-5130
144-920-1120
14X-71-11310
154-70-11313
154-70-11314
154-71-43190
154-72-11151
154-81-11190
154-81-11191
156-82-00001
175-70-21115
175-70-26310
17A-71-11654
17A-71-45210
17A-71-45220
17A-71-45230
17M-72-21160
195-70-12492
195-71-61550
198-71-11181

Metrics
error: HCEPARTS Content is protected !!