John Deere Front End Loader End Bit T167829, level cut end bit RH/LH, John Deere Loader End Edge, Loader Replacement Bolt On Edge End Bits China Factory John Deere Front End Loader End Bit Feature: Part No.: T167829 Type: Loader END BIT Size: 1.38” thick * 19.19” wide * 9.19” length Material: High carbon steel or Boron steel […]
Case Replacement Bucket Cutting Edges 142301A1, Loader Bulldozer Case Replacement Backhoe Bucket Center Edges, Replacement Bolt On Bucket Cutting Edge, Reversible Bolt-On Blade Cutting Edge China Factory
Case Replacement Bucket Cutting Edges Feature:
Part No.: 142301A1
Type: Cutting Edges
Size: 5/8″ thick * 6″ wide * 93″ length
Material: High carbon steel or Boron steel
Compatible Machine Models: Case Bulldozer / Loader
Made in China
Case style bolt on center cutting edge, for a Case backhoe bucket. This is a double beveled reversible bucket cutting edge that is 5/8″ thick, 6″ wide and 93″ in length. It takes 10 of a 7/8″ (750X225) plow bolt and 10 of a 7/8″ (750 HEscoNUT) hex nut. The bolt hole spacing is 9-3/4″ from center to center of the bolt holes, and 5” when measured from the edge of the bucket cutting edge to the center of the first hole.
Made from high-carbon manganese steel alloy, producing a blade that is both tough and resistant to wear to minimize breakage. With a hardness of Rc 29 ± 5, blade performance is optimized in medium to aggressive environments. Warranted against breakage due to a defect in material and workmanship for the life of the cutting edge.
Case Bulldozer End Edge Case Backhoe Cutting Edges Blades with the longest life.
Cutting edges are a Real Steel specialty. As well as stocking the best cutting edges, our custom designed cutting edges provide superior quality and better wear life. You’ll get cutting edges that are harder and tougher, and you’ll get them fast.
We can custom make wear parts for every major brand that work harder and last longer. For any parts that wear out, get in touch and we can help.
Bolt-On Reversible Blade Cutting Edges
Wear one side and reverse the edge for twice the life
Pre-drilled extra-hard carbon steel for maximum wear resistance
Side View of Edge Mounted on Bucket
Case was among the pioneers to develop and offer the industry bolt-on loader blades. This system makes blade changes simple, fast and inexpensive. You can change worn out bucket edges in minutes, in the field, with hand tools. By using reversible, double bevel flat sections, the wear life of the cutting edge is doubled.