Buy EDGE-CUTTING 7T1629 Caterpillar Genuine Parts Specifications:
Part No. 7T-1629, 7T1629
OEM
7T1629
Manufacturer
Caterpillar
Machine
Grader
A 152mm Material HIGH CARBON
B 16mm Diameter 3/4″
C 2438mm Tooth
D Holes 10
E Class
F
G
R
Weight 41,2Kg
Cat motor grader cutting edges provide the best balance of abrasion and impact resistance. Both Cat cutting edges and end bits are designed as a balanced system to move more material over a longer period with less downtime. This is accomplished by providing great strength for superior breakage resistance, and by offering maximum wear protection from both bottom and face wear on the cutting edge.
Material: Manganese steel, boron steel
Thickness: 13mm; 16mm; 19mm; 25mm.
Width: 152mm and 203mm.
Length: 4=1219mm; 5=1524mm; 6=1828mm; 7=2133mm; 8=2438mm.
Bolts Dia: 3/4; 5/8
Adaptable for most of graders in market, including Komatsu, Caterpillar, Hitachi, Sumitomo, Kato, Daewoo, etc, also could be designed and produced by clients’ drawing.
Mechanical properties of products could reach international standard after quenching and tempering heat treatment.
Thanks to our high quality raw material and professional heat treatment, our products’ wear life and performance of are 15% ~ 20% higher than most of other similar products in market.
Trade Terms: FOB NINGBO.
Payment Terms: 30% prepaid, T/T at the sight of copy of B/L.
Transmission Direction and Speed Control Lever SchematicProblems with the transmission direction and speed control lever will cause the machine to respond incorrectly to the actions of the lever. Some problems with the transmission direction and speed control lever will cause the transmission to remain in the present speed and direction when a problem is detected. Other problems with the transmission direction and speed control lever will cause the transmission to shift to neutral.
View the status.
Use the Caterpillar Electronic Technician (ET) to view the status “Group 1 Gear Lever Parameters”.
Actuate the transmission direction and speed control lever through all speeds in forward and reverse. Verify the positions on the display of the ET.
Operate the machine in all speeds and all directions. All speeds and all directions may not be available.Expected Result: The fault is NOT present.Results:
OK – The fault is NOT present. Suspect an intermittent fault. STOP.
NOT OK – The fault is still present. Note the positions that read incorrectly on the ET. Proceed to Step 2.
Check the harness. 7T-1626, 7T1626 CAT Grader Curve Cutting Edge
Check the harness connectors and the harness from the transmission direction and speed control lever to the power train electronic control module (ECM).
Thoroughly inspect the connectors for the transmission direction and speed control lever and the connectors for the power train ECM.
Visually inspect the harness wiring from the transmission direction and speed control lever to the power train ECM.
Use the ET to view the status “Group 1 Gear Lever Parameters”.
Actuate the transmission direction and speed control lever through all speeds in forward and reverse. Verify the positions on the display for the ET.
| Part Number | Measurement (mm) | Description | Brand | Weight(Kgs) |
| 232-70-12142 | 1828mmX152mmX13mm 5/8″X8 | DBC Grader Blades | Komatsu | 24 |
| 4T3512 | 1219mmX203mmX25mm 3/4″X9 | DBC Grader Blades | CAT | 45 |
| 7T1627 | 2438mmX203mmX19mm 3/4″X17 | DBC Grader Blades | CAT | 67 |
| 7T1625 | 2133mmX203mmX19mm 3/4″X15 | DBC Grader Blades | CAT | 59 |
| 7T1638 | 1828mmX203mmX19mm 3/4″X13 | DBC Grader Blades | CAT | 50 |
| 9W2341 | 1524mmX203mmX19mm 3/4″X11 | DBC Grader Blades | CAT | 42 |
| 9W2339 | 1219mmX203mmX19mm 3/4″X9 | DBC Grader Blades | CAT | 33.5 |
| 7T1630 | 2438mmX203mmX19mm 5/8″X17 | DBC Grader Blades | CAT | 67 |
| 7T1623 | 2133mmX203mmX19mm 5/8″X15 | DBC Grader Blades | CAT | 59 |
| 7T1634 | 1828mmX203mmX19mm 5/8″X13 | DBC Grader Blades | CAT | 50 |
| 9W2340 | 1524mmX203mmX19mm 5/8″X11 | DBC Grader Blades | CAT | 42 |
| 9W2338 | 1219mmX203mmX19mm 5/8″X9 | DBC Grader Blades | CAT | 33.5 |
| 7T1628 | 2438mmX203mmX16mm 3/4″X17 | DBC Grader Blades | CAT | 56 |
| 7T1624 | 2133mmX203mmX16mm 3/4″X15 | DBC Grader Blades | CAT | 49 |
| 7T1639 | 1828mmX203mmX16mm 3/4″X13 | DBC Grader Blades | CAT | 42 |
| 9W2329 | 1219mmX203mmX16mm 3/4″X9 | DBC Grader Blades | CAT | 28 |
| 7T1631 | 2438mmX203mmX16mm 5/8″X17 | DBC Grader Blades | CAT | 56 |
| 7T1643 | 2133mmX203mmX16mm 5/8″X15 | DBC Grader Blades | CAT | 49 |
| 7T1636 | 1828mmX203mmX16mm 5/8″X13 | DBC Grader Blades | CAT | 42 |
| Part Number | Measurement (mm) | Description | Weight(Kgs) |
| 7T1643 | 2133mmX203mmX16mm 5/8″X15 | DBC Grader Blades | 49 |
| 7T1636 | 1828mmX203mmX16mm 5/8″X13 | DBC Grader Blades | 42 |
| 7T1641 | 1524mmX203mmX16mm 5/8″X11 | DBC Grader Blades | 35 |
| 9W2328 | 1219mmX203mmX16mm 5/8″X9 | DBC Grader Blades | 28 |
| 3G1628 | 2438mmX203mmX13mm 3/4″X17 | DBC Grader Blades | 45.5 |
| 3G1627 | 2133mmX203mmX13mm 3/4″X15 | DBC Grader Blades | 40 |
| 3G1626 | 1828mmX203mmX13mm 3/4″X13 | DBC Grader Blades | 34 |
| 134-1779 | 1524mmX203mmX13mm 3/4″X11 | DBC Grader Blades | 28 |
| 135-6738 | 1219mmX203mmX13mm 3/4″X9 | DBC Grader Blades | 23 |
| 8J8980 | 2438mmX203mmX13mm 5/8″X17 | DBC Grader Blades | 45.5 |
| 8D2789 | 2133mmX203mmX13mm 5/8″X15 | DBC Grader Blades | 40 |
| 8D2788 | 1828mmX203mmX13mm 5/8″X13 | DBC Grader Blades | 34 |
| 9J3863 | 1524mmX203mmX13mm 5/8″X11 | DBC Grader Blades | 28 |
| 3G7965 | 1219mmX203mmX13mm 5/8″X9 | DBC Grader Blades | 23 |
| 9W2335 | 2133mmX152mmX19mm 3/4″X15 | DBC Grader Blades | 42 |
| 7T1644 | 2133mmX152mmX19mm 5/8″X15 | DBC Grader Blades | 42 |
| 7T1635 | 1828mmX152mmX19mm 5/8″X13 | DBC Grader Blades | 35.5 |
| 7T1642 | 1524mmX152mmX19mm 5/8″X11 | DBC Grader Blades | 30 |
| 7T1629 | 2438mmX152mmX16mm 3/4″X17 | DBC Grader Blades | 39 |
| 7T1626 | 2133mmX152mmX16mm 3/4″X15 | DBC Grader Blades | 34 |
| 7T1637 | 1828mmX152mmX16mm 3/4″X13 | DBC Grader Blades | 29 |
| 7T1632 | 2438mmX152mmX16mm 5/8″X17 | DBC Grader Blades | 39 |
| 7T1645 | 2133mmX152mmX16mm 5/8″X15 | DBC Grader Blades | 34 |
| 5B5562 | 2133mmX152mmX16mm 5/8″X9 | DBC Grader Blades | 34 |
| 7T1633 | 1828mmX152mmX16mm 5/8″X13 | DBC Grader Blades | 29 |
| 7T1640 | 1524mmX152mmX16mm 5/8″X11 | DBC Grader Blades | 25 |
| 9W2302 | 2438mmX152mmX13mm 3/4″X17 | DBC Grader Blades | 31.5 |
| 9W2300 | 2133mmX152mmX13mm 3/4″X15 | DBC Grader Blades | 28 |
| 9W2298 | 1828mmX152mmX13mm 3/4″X13 | DBC Grader Blades | 24 |
| 9W2301 | 2438mmX152mmX13mm 5/8″X9 | DBC Grader Blades | 31.5 |
| 9W2299 | 2133mmX152mmX13mm 5/8″X15 | DBC Grader Blades | 28 |
Caterpillar Style Non-Reversible Center Segment Edge Protection 100-6668NR, Caterpillar Style Bolt On Center Segment, Track Loader & Wheel Loader Segment Edge, Caterpillar Segment Edge, CAT Replacement Bolt-On Segments China Factory Non-Reversible Center Segment 100-6668NR Feature: Part No.: 100-6668NR Type: Loader Segment Edge Protection Material: High carbon steel or Boron steel Compatible Machine Models: CAT Loader TRACK […]
Center Half-Arrow Segment Edge 3533336, Replacement Bolt-On Cutting Edge, Caterpillar Style Half-Arrow Edge Segment with ARM, CAT Segment Edge Protection, Abrasion Resistant Material GET System China Supplier Center Half-Arrow Segment Edge 3533336 Feature: Part No.: 353-3336 Type: Segment Edge Protection Machine: Loader Length (in): 37.95 Width (in): 2.99 Height(in): 16.73 Material: High carbon steel or Boron […]
Straight End Edge Segment 3G6395, Replacement Bolt-On cutting Edge, Caterpillar Style Bolt-On END EDGE, CAT Segment Edge Protection, EDGE-END Corner Guard System, GET System China Supplier Straight End Edge Segment 3G6395 Feature: Part No.: 3G-6395 Type: Segment Edge Protection Machine: LHD Loader Length (in): 45.28 Width (in): 13.11 Height(in): 4.46 Material: High carbon steel or Boron […]
Caterpillar Style Half Arrow Non-Reversible End Segment Edge Protection 100-6666NR, Caterpillar Style Bolt On Segment, Track Loader & Wheel Loader Segment Edge, Caterpillar Segment Edge, CAT Replacement Bolt-On Segments China Factory End Segment Edge Protection 100-6666NR Feature: Part No.: 100-6666NR Type: Loader Segment Edge Protection Size: 1.19” thick * 14.17” wide * 11.54” length Material: High […]
Caterpillar Style Bolt On Segment 100-6666, Segment Edge Protection, Track Loader Segments, Wheel Loader Segment Edge, Caterpillar Front End Loader Segment Edge, CAT Replacement Bolt-On Segments China Factory Caterpillar Style Bolt On Segment Feature: Part No.: 100-6666 Type: Loader Segment Edge Protection Size: 1.19” thick * 14.17” wide * 11.54” length Material: High carbon steel or […]
LHD Loader Half Arrow Edge Segment 3187840, Caterpillar Style Weld On Half Arrow Edge Segment, Half Arrow Segment Protection Edge, Caterpillar Cutting Edge Segment, CAT Wheel Loader Replacement Edge Protection China Factory LHD Loader Half Arrow Edge Segment 3187840 Feature: Part No.: 318-7840 Type: Segment Edge Protection Machine: LHD Loader Length (in): 21.65 Width (in): 12.99 […]
CAT Loader Center Segment 109-2675C, Caterpillar Style Bolt On RH Segment, Wheel Loader Segment Edge, Caterpillar Segment Edge, CAT Replacement Bolt-On Segments China Factory CAT Loader Center Segment 109-2675C Feature: Part No.: 109-2675C Type: Loader Segment Edge Protection Material: High carbon steel or Boron steel Compatible Machine Models: CAT Loader WHEEL LOADERS 988F,986H,988H,988G,988KLRC,988K Made in China […]
CAT Loader Right Hand Segment 101-9436NRR, Caterpillar Style Bolt On RH Segment, Wheel Loader Segment Edge, Caterpillar Segment Edge, CAT Replacement Bolt-On Segments China Factory CAT Loader Right Hand Segment 101-9436NRR Feature: Part No.: 101-9436NRR Length (in): 13.9 Thickness(in): 1.57 Type: Loader Segment Edge Protection Material: High carbon steel or Boron steel Compatible Machine Models: CAT […]
