9W2307, 9W-2307 Caterpillar Genuine Blade, Motorgrader Bolt On Blade, Low Price Dbc Grader Blades, CATERPILLAR Curved Grader Blade, CAT Genuine Parts Motorgrader Curved Double Bevel Blade, G.E.T Parts Boron Steel Center Blades with 6 holes, Through Hardened Heat Treated Cutting Edges for Motor Grader China Supplier
9W2307, 9W-2307 Caterpillar Genuine Blade Specifications:
Part No. 9W2307, 9W-2307
Weight: 120 pounds 54 kg.
Information:
BEVEL ANGLE 22.5
BOLT HOLE SIZE 18 mm
HOLE SPACING 304.8 mm
LENGTH 4264.8 mm
NUMBER OF HOLES 16
THICKNESS 12.7 mm
WIDTH 152.4 mm
Cutting Edges
• Complete line of curved double bevel (CDB) cutting edges for every make and model
• CDB sizes range from 1/2″ x 6″ for light grading up to heavy-duty 1″ x 8″ CDB section for greater wear life
• Flame-hardened grader cutting edges with surface hardness up to 62 RC, provides max mum wear resistance
• XHD flat grader blades are available in sizes 3/4″ x 8″ through 3″ x 16″ FDB
• Select serrated grader blades are available for frozen or hard packed ground conditions
End Bits
• HCEParts end bits and overlay end bits help protect the moldboard, while extending the life of cutting edges. End bits are available in standard and heavy-duty.
• Drop forged, triple alloy steel shanks fit precisely providing maximum strength and resistance to shock
Scarifier Shanks and Tips
• Tips are made with a tough alloy, offering maximum wear and economic value
• Tips available in rectangle and oval slot designs
Start By:a. remove radiator 1. Remove the nuts and bolts (2) that hold the trunnion to the engine front support. Put two 50 ton screw jacks in position under the front drive housing at location (X). 9W2295 9W-2295 CARBON LEVEL BLADE 7 # 5/8″ Hole Raise the engine with the jacks until the trunnion is approximately 51 mm (2 in.) above the engine front support.2. Fasten tooling (A) to tube assembly (4) at locations (Y).3. Fasten tooling (A) to engine front support (3) with two nylon straps. 9W2294, 9W-2294 China Grader Blade Ground Engaging Tools 9W2303 9W2304 9W2305 9W2300, 9W-2300 9 # 3/4″Holes Grader Cutting Edge
1. Drain the coolant from the engine. 2. Disconnect hose assembly (3) from the elbow.3. Loosen the clamps that hold hoses (1) and (4). Move the hoses away from the radiator.4. Remove the bolts that hold fan guard (2) to the radiator. Move the fan guard away from the radiator. 5. Remove all of the bolts that hold air conditioning condenser (5) to the top tank of the radiator.6. Fasten a hoist to the top tank with tooling (A).7. Remove all of the bolts that hold the top tank to both side channels (6).8. Remove the top tank from the radiator cores. The weight of the top tank is approximately 140 kg (308.0 lb).9. Remove the rubber seals from the bottom of the top tank. Some of the seals may stay on the radiator cores. Remove them also. 10. Remove two bolts China Low Price 9W2303 9W-2303 Double Bevel Cutting Blade, one at the rear not shown, from each core that is to be removed. 11. Remove the radiator core from the bottom tank.12. Remove rubber seal (8) from the bottom tank.13. Install the radiator cores in the reverse order of removal.14. Lubricate all rubber seals (8) at the bottom and top of the cores with liquid soap just prior to assembly. 15. Before tightening bolts (7), adjust gap (X), at the front of the radiator, to 6.5 mm (.25 in.) and gap (Y) at the rear of the radiator to 2.0 1.5 mm (.08 .06 in.). The cores must not contact each other after assembly.16. Fill the cooling system with coolant and check for leaks. See the maintenance guide.
Typical Example3. Put O-ring seals (8) in position on each end of core assembly (1).4. Align the connector in the bottom of the core assembly with adapter (9). Install core assembly (1). Install the bolts that hold the core assembly in place. Motorgrader Bolt On Blade 5. Fasten a hoist and tooling (A) to housing (10). Put the gasket and housing (10) in position, and install the spacers and bolts to hold it in place. Tighten the bolts to a torque of 55 7 N m (41 5 lb.ft.). 9W2304 9W2297 9W-2297 8 Holes Caterpillar Bolt-On Cutting Edges 9W2298 9W-2298 8 # 3/4″ Holes Caterpillar Cutting Edge