9W2306, 9W-2306 Motorgrader Bolt On Blade

  • 9W2306, 9W-2306 Motorgrader Bolt On Blade

9W2306, 9W-2306 Motorgrader Bolt On Blade, Low Price Dbc Grader Blades, CATERPILLAR Curved Grader Blade, CAT Genuine Parts Motorgrader Curved Double Bevel Blade, G.E.T Parts Boron Steel Center Blades with 6 holes, Through Hardened Heat Treated Cutting Edges for Motor Grader China Supplier

9W2306, 9W-2306 Motorgrader Bolt On Blade Specifications:
Part No. 9W2306, 9W-2306
OEM
9W2306
Manufacturer
Caterpillar
Machine
Grader

A 152mm Material HIGH CARBON
B 13mm Diameter 3/4″
C 3658mm Tooth

Cutting Edges
• Complete line of curved double bevel (CDB) cutting edges for every make and model
• CDB sizes range from 1/2″ x 6″ for light grading up to heavy-duty 1″ x 8″ CDB section for greater wear life
• Flame-hardened grader cutting edges with surface hardness up to 62 RC, provides max mum wear resistance
• XHD flat grader blades are available in sizes 3/4″ x 8″ through 3″ x 16″ FDB
• Select serrated grader blades are available for frozen or hard packed ground conditions

End Bits
• HCEParts end bits and overlay end bits help protect the moldboard, while extending the life of cutting edges. End bits are available in standard and heavy-duty.
• Drop forged, triple alloy steel shanks fit precisely providing maximum strength and resistance to shock

Scarifier Shanks and Tips
• Tips are made with a tough alloy, offering maximum wear and economic value
• Tips available in rectangle and oval slot designs

Start By:a. remove radiator 1. Remove the nuts and bolts (2) that hold the trunnion to the engine front support. Put two 50 ton screw jacks in position under the front drive housing at location (X).  9W2295 9W-2295 CARBON LEVEL BLADE 7 # 5/8″ Hole  Raise the engine with the jacks until the trunnion is approximately 51 mm (2 in.) above the engine front support.2. Fasten tooling (A) to tube assembly (4) at locations (Y).3. Fasten tooling (A) to engine front support (3) with two nylon straps. 9W2294, 9W-2294 China Grader Blade Ground Engaging Tools 9W2303 9W2304 9W2305 9W2300, 9W-2300 9 # 3/4″Holes Grader Cutting Edge

1. Loosen the clamp that holds the air cleaner elbow to tube assemblies (3).2. Remove four bolts (4) that hold clamp assemblies (2) to the hood.3. Remove hood (1), tube assembly (3) and clamp assemblies (4) from the hood as a unit. 4. Remove cotter pin (5) and the washer, and disconnect prop assembly (6) from the hood.5. Fasten a hoist to the front hood. Remove the bolts that hold the hood to the radiator guard and bolts (7). Remove the hood from the machine. The weight of the front hood is 149 kg (328 lb.). 6. Remove the nuts from switches (9). Remove the four bolts and plate (8) from the radiator guard.7. Put identification marks on the wires to switches (9) for correct installation at assembly, and disconnect the wires from the switches. 8. Disconnect three wire harnesses (10). 9. Fasten a hoist to radiator guard (11).10. Remove the bolts that hold the radiator guard in place, and remove it from the machine.Motorgrader Bolt On Blade The weight of the radiator guard is 180 kg (397 lb.). The following steps are for installation of the radiator guard.11. Fasten a hoist to radiator guard (11). Put the radiator guard in position on the machine, and install the bolts that hold it in place.12. Connect three wire harnesses (10).13. Connect the wires to switches (10). Put the switches in position in plate (8), and install the nuts that hold them in place.14. Put plate (8) in position on the radiator guard, and install the four bolts that hold it in place.15. Fasten a hoist to the front hood assembly. Put the front hood assembly in position, and install the bolts that hold it to the radiator guard.16. Install bolts (7). Put prop assembly (6) in position, and install the washer and cotter pin (5).17. Put tube assembly (3), hood (1) and clamp assemblies (2) in position on the front hood assembly. Install bolts (4) to hold them in place.18. Tighten the clamp to hold the air cleaner elbow to tube assembly (3).  9W2297 Double Bevel Grader Tractor Curved Blades 8 # 5/8″ Hole

Typical Example3. Put O-ring seals (8) in position on each end of core assembly (1).4. Align the connector in the bottom of the core assembly with adapter (9). Install core assembly (1). Install the bolts that hold the core assembly in place. Motorgrader Bolt On Blade 5. Fasten a hoist and tooling (A) to housing (10). Put the gasket and housing (10) in position, and install the spacers and bolts to hold it in place. Tighten the bolts to a torque of 55 7 N m (41 5 lb.ft.).  9W2304 9W2297 9W-2297 8 Holes Caterpillar Bolt-On Cutting Edges 9W2298 9W-2298 8 # 3/4″ Holes Caterpillar Cutting Edge

More
  • Affordable Price
  • OEM Parts Available
  • Payment Easy
  • Worldwide Delivery
  • Quality Guaranteed
  • Bulk Discount

Product Range

Imperial
Part Number Measurement (mm) Description Brand Weight(Kgs)
232-70-12142 1828mmX152mmX13mm  5/8″X8 DBC Grader Blades Komatsu 24
4T3512 1219mmX203mmX25mm  3/4″X9 DBC Grader Blades CAT 45
7T1627 2438mmX203mmX19mm  3/4″X17 DBC Grader Blades CAT 67
7T1625 2133mmX203mmX19mm  3/4″X15 DBC Grader Blades CAT 59
7T1638 1828mmX203mmX19mm  3/4″X13 DBC Grader Blades CAT 50
9W2341 1524mmX203mmX19mm  3/4″X11 DBC Grader Blades CAT 42
9W2339 1219mmX203mmX19mm  3/4″X9 DBC Grader Blades CAT 33.5
7T1630 2438mmX203mmX19mm  5/8″X17 DBC Grader Blades CAT 67
7T1623 2133mmX203mmX19mm  5/8″X15 DBC Grader Blades CAT 59
7T1634 1828mmX203mmX19mm  5/8″X13 DBC Grader Blades CAT 50
9W2340 1524mmX203mmX19mm  5/8″X11 DBC Grader Blades CAT 42
9W2338 1219mmX203mmX19mm  5/8″X9 DBC Grader Blades CAT 33.5
7T1628 2438mmX203mmX16mm  3/4″X17 DBC Grader Blades CAT 56
7T1624 2133mmX203mmX16mm  3/4″X15 DBC Grader Blades CAT 49
7T1639 1828mmX203mmX16mm  3/4″X13 DBC Grader Blades CAT 42
9W2329 1219mmX203mmX16mm  3/4″X9 DBC Grader Blades CAT 28
7T1631 2438mmX203mmX16mm  5/8″X17 DBC Grader Blades CAT 56
7T1643 2133mmX203mmX16mm  5/8″X15 DBC Grader Blades CAT 49
7T1636 1828mmX203mmX16mm  5/8″X13 DBC Grader Blades CAT 42
Metrics
Part Number Measurement (mm) Description Weight(Kgs)
7T1643 2133mmX203mmX16mm  5/8″X15 DBC Grader Blades 49
7T1636 1828mmX203mmX16mm  5/8″X13 DBC Grader Blades 42
7T1641 1524mmX203mmX16mm  5/8″X11 DBC Grader Blades 35
9W2328 1219mmX203mmX16mm  5/8″X9 DBC Grader Blades 28
3G1628 2438mmX203mmX13mm  3/4″X17 DBC Grader Blades 45.5
3G1627 2133mmX203mmX13mm  3/4″X15 DBC Grader Blades 40
3G1626 1828mmX203mmX13mm  3/4″X13 DBC Grader Blades 34
134-1779 1524mmX203mmX13mm  3/4″X11 DBC Grader Blades 28
135-6738 1219mmX203mmX13mm  3/4″X9 DBC Grader Blades 23
8J8980 2438mmX203mmX13mm  5/8″X17 DBC Grader Blades 45.5
8D2789 2133mmX203mmX13mm  5/8″X15 DBC Grader Blades 40
8D2788 1828mmX203mmX13mm  5/8″X13 DBC Grader Blades 34
9J3863 1524mmX203mmX13mm  5/8″X11 DBC Grader Blades 28
3G7965 1219mmX203mmX13mm  5/8″X9 DBC Grader Blades 23
9W2335 2133mmX152mmX19mm  3/4″X15 DBC Grader Blades 42
7T1644 2133mmX152mmX19mm  5/8″X15 DBC Grader Blades 42
7T1635 1828mmX152mmX19mm  5/8″X13 DBC Grader Blades 35.5
7T1642 1524mmX152mmX19mm  5/8″X11 DBC Grader Blades 30
7T1629 2438mmX152mmX16mm  3/4″X17 DBC Grader Blades 39
7T1626 2133mmX152mmX16mm  3/4″X15 DBC Grader Blades 34
7T1637 1828mmX152mmX16mm  3/4″X13 DBC Grader Blades 29
7T1632 2438mmX152mmX16mm  5/8″X17 DBC Grader Blades 39
7T1645 2133mmX152mmX16mm  5/8″X15 DBC Grader Blades 34
5B5562 2133mmX152mmX16mm  5/8″X9 DBC Grader Blades 34
7T1633 1828mmX152mmX16mm  5/8″X13 DBC Grader Blades 29
7T1640 1524mmX152mmX16mm  5/8″X11 DBC Grader Blades 25
9W2302 2438mmX152mmX13mm  3/4″X17 DBC Grader Blades 31.5
9W2300 2133mmX152mmX13mm  3/4″X15 DBC Grader Blades 28
9W2298 1828mmX152mmX13mm  3/4″X13 DBC Grader Blades 24
9W2301 2438mmX152mmX13mm  5/8″X9 DBC Grader Blades 31.5
9W2299 2133mmX152mmX13mm  5/8″X15 DBC Grader Blades 28
error: HCEPARTS Content is protected !!