8J9821 Caterpillar 14H 160H 160M Curved Edges for Grader, CATERPILLAR Curved Grader Blade, CAT Genuine Parts Motorgrader Curved Double Bevel Blade, G.E.T Parts Boron Steel Center Blades with 17 holes, Through Hardened Heat Treated Cutting Edges for Motor Grader China Supplier
8J9821 Caterpillar 14H 160H 160M Curved Edges for Grader Specifications:
Part No. 8J9821 , 8J-9821
OEM
8J9821
Manufacturer
Caterpillar
Machine
Grader
A 203mm Material HIGH CARBON
B 16mm Diameter 3/4″
C 2438mm Tooth
D Holes 17
E Class
F
G
R
Weight 55,6Kg
Compatible equipment models: 8J9821:
MOTOR GRADER 14G 14H 14H NA 14M 160H 160H NA 160M 160M 2 163H 163H NA 16G Caterpillar
Cat motor grader cutting edges provide the best balance of abrasion and impact resistance. Both Cat cutting edges and end bits are designed as a balanced system to move more material over a longer period with less downtime. This is accomplished by providing great strength for superior breakage resistance, and by offering maximum wear protection from both bottom and face wear on the cutting edge.
Material: Manganese steel, boron steel
Thickness: 13mm; 16mm; 19mm; 25mm.
Width: 152mm and 203mm.
Length: 4=1219mm; 5=1524mm; 6=1828mm; 7=2133mm; 8=2438mm.
Bolts Dia: 3/4; 5/8
Adaptable for most of graders in market, including Komatsu, Caterpillar, Hitachi, Sumitomo, Kato, Daewoo, etc, also could be designed and produced by clients’ drawing.
Mechanical properties of products could reach international standard after quenching and tempering heat treatment.
Thanks to our high quality raw material and professional heat treatment, our products’ wear life and performance of are 15% ~ 20% higher than most of other similar products in market.
Trade Terms: FOB NINGBO.
Payment Terms: 30% prepaid, T/T at the sight of copy of B/L.
Specification for 118-7508 Hoe Stick Gp
Item Qty Part Specification Description
– All bores must be free of paint. Use 5P-0960 Grease Cartridge to coat all bores for the pins, bucket, bushings, and the cylinder pin bores.
1 1 093-0065 Shim As required, use the shim of thickness 1.0 mm (0.04 inch) to adjust maximum lateral clearance of 1.0 mm (0.04 inch).
2 As required, use the following shims in order to adjust the maximum lateral clearance of
1.0 mm (0.04 inch): 1 133-2717 Shim Thickness is 0.5 mm (0.02 inch). 7T1639, 7T-1639 High Carbon Curved Cutting Edge for Motorgrader
1 099-7091 Shim Thickness is 1.5 mm (0.06 inch). 7T1630, 7T-1630 Edges Cutting Caterpillar Grader Parts
3 2 172-5853 Pin As Diameter is 59.850 0.025 mm (2.3563 0.0010 inch).
4 2 8T-4780 Bolt Torque to 325 40 N m (240 30 lb ft).
5 2 114-4866 Bushing Bore before assembly is 50.180 0.020 mm (1.9756 0.0008 inch).
Installation depth is 7.5 0.5 mm (0.30 0.02 inch). 7T1631, 7T-1631 Cat General Duty Cutting Edge 16mm
6 2 114-4850 Lip Type Seal Lubricate lightly with lubricant that is being sealed.
7 2 113-4982 Bushing Bore before assembly is 70.230 0.020 mm (2.7650 0.0008 inch).
Installation depth is 7.5 0.5 mm (0.30 0.02 inch). 7T1640, 7T-1640 High Carbon Curved Cutting Edges for Motorgrader
8 4 093-1434 Lip Type Seal Lubricate lightly with lubricant that is being sealed.
9 As required, use the following shims in order to adjust the maximum lateral clearance of
1.0 mm (0.04 inch):
1 133-2717 Shim Thickness is 0.5 mm (0.02 inch). Buy EDGE-CUTTING 7T1629 Caterpillar Genuine Parts
1 099-7091 Shim Thickness is 1.5 mm (0.06 inch).
10 1 093-0065 Shim As required, use the shim of thickness
1.0 mm (0.04 inch) to adjust maximum lateral clearance of 1.0 mm (0.04 inch). 7T1636, 7T-1636 General Duty Motor Grader Cutting Edges
11 1 128-7656 Bushing Bore before assembly is 70.230 0.020 mm (2.7650 0.0008 inch).
Installation depth is 7.5 0.5 mm (0.30 0.02 inch). 7T1637, 7T-1637 Motor Grader Abrasion Resistance Cutting Edge