8D2789, 8D-2789 CAT Edge Cutting Grader Blade 15# 5/8″ Bolt, Motorgrader Bolt On Blade, Low Price Dbc Grader Blades, CATERPILLAR Curved Grader Blade, CAT Genuine Parts Motorgrader Curved Double Bevel Blade, G.E.T Parts Boron Steel Center Blades with 6 holes, Through Hardened Heat Treated Cutting Edges for Motor Grader China Supplier
8D2789, 8D-2789 CAT Edge Cutting Grader Blade Specifications:
Part No. 8D2789, 8D-2789
OEM
8D2789
Manufacturer
Caterpillar
Machine
Grader
A 203mm Material HB500
B 13mm Diameter 5/8″
C 2133mm Tooth
D Holes 15
E Class
F
G
R
Weight 35,9Kg
Cutting Edges
• Complete line of curved double bevel (CDB) cutting edges for every make and model
• CDB sizes range from 1/2″ x 6″ for light grading up to heavy-duty 1″ x 8″ CDB section for greater wear life
• Flame-hardened grader cutting edges with surface hardness up to 62 RC, provides max mum wear resistance
• XHD flat grader blades are available in sizes 3/4″ x 8″ through 3″ x 16″ FDB
• Select serrated grader blades are available for frozen or hard packed ground conditions
2. Remove engine side covers. Disconnect wires (3) from starter. Put a mark on wires for identification.3. Disconnect wire for the glow plugs. Disconnect line for oil pressure gauge.4. Disconnect wires from alternator. Put a mark on wires for identification.5. Disconnect line (2) for air cleaner indicator and line (1) for water temperature gauge.6. Disconnect the control linkage from the governor. 7D4509, 7D-4509 Cat Curved Blade 5D1163, 5D-1163 Caterpillar Right Hand Grader Blade 7. Remove the clamp from hydraulic oil lines. 8. Remove floor plates and disconnect the wires from the transmission safety switch (4). 9. Remove support (5) for the floor plates.10. Disconnect line for torque converter temperature gauge.11. Remove the bolts that hold the dash to fuel tank and hydraulic tank. 12. Fasten a hoist and remove bolt that holds dash to frame. Remove dash. Weight is 240 lb. (108 kg).Install Dash Panel (D3 Only) 5B5562, 5B-5562 Caterpillar Double Bevel Curve Blade
Personal injury can result from contact with refrigerant.Contact with refrigerant can cause frost bite. Keep face and hands away to help prevent injury.Protective goggles must always be worn when refrigerant lines are opened, even if the gauges indicate the system is empty of refrigerant.Always use precaution when a fitting is removed. 7D4509 11 Holes Curved Carbon Steel Boron Steel Blade Slowly loosen the fitting. If the system is still under pressure, release it slowly in a well ventilated area.Personal injury or death can result from inhaling refrigerant through a lit cigarette.Inhaling air conditioner refrigerant gas through a lit cigarette or other smoking method or inhaling fumes released from a flame contacting air conditioner refrigerant gas, can cause bodily harm or death.Do not smoke when servicing air conditioners or wherever refrigerant gas may be present.Use a certified recovery and recycling cart to properly remove the refrigerant from the air conditioning system. 6G8623, 6G-8623 Cat Motor Grader Curved Blade