7D4509 11 Holes Curved Carbon Steel Boron Steel Blade 11# 5/8″ Bolt, Motorgrader Bolt On Blade, Low Price Dbc Grader Blades, CATERPILLAR Curved Grader Blade, CAT Genuine Parts Motorgrader Curved Double Bevel Blade, G.E.T Parts Boron Steel Center Blades with 6 holes, Through Hardened Heat Treated Cutting Edges for Motor Grader China Supplier
7D4509 11 Holes Curved Carbon Steel Boron Steel Blade Specifications:
Part No. 7D4509,7D-4509
OEM
7D4509
Manufacturer
Caterpillar
Machine
Grader
A 203mm Material HB500
B 16mm Diameter 5/8″
C 1524mm Tooth
D Holes 11
E Class
F
G
R
Weight 34,8Kg
Cutting Edges
• Complete line of curved double bevel (CDB) cutting edges for every make and model
• CDB sizes range from 1/2″ x 6″ for light grading up to heavy-duty 1″ x 8″ CDB section for greater wear life
• Flame-hardened grader cutting edges with surface hardness up to 62 RC, provides max mum wear resistance
• XHD flat grader blades are available in sizes 3/4″ x 8″ through 3″ x 16″ FDB
• Select serrated grader blades are available for frozen or hard packed ground conditions
2. Remove engine side covers. Disconnect wires (3) from starter. Put a mark on wires for identification.3. Disconnect wire for the glow plugs. Disconnect line for oil pressure gauge.4. Disconnect wires from alternator. Put a mark on wires for identification.5. Disconnect line (2) for air cleaner indicator and line (1) for water temperature gauge.6. Disconnect the control linkage from the governor. 5D1163, 5D-1163 Caterpillar Right Hand Grader Blade 7. Remove the clamp from hydraulic oil lines. 8. Remove floor plates and disconnect the wires from the transmission safety switch (4). 9. Remove support (5) for the floor plates.10. Disconnect line for torque converter temperature gauge.11. Remove the bolts that hold the dash to fuel tank and hydraulic tank. 12. Fasten a hoist and remove bolt that holds dash to frame. Remove dash. Weight is 240 lb. (108 kg).Install Dash Panel (D3 Only) 5B5562, 5B-5562 Caterpillar Double Bevel Curve Blade
5D1164, 5D-1164 Caterpillar Left Hand Grader Blade 1. Fasten a hoist and put the dash (1) in position on the machine. Install the bolts that hold the dash to the frame and tanks.2. Connect a line for torque converter temperature gauge. 3. Install the support (2) for the floor plates.4. Connect the wires to the transmission safety switch and install floor plates.5. Install clamp on hydraulic lines.6. Connect control linkage to governor (4).7. Connect line for air cleaner indicator. 4D9922, 4D-9922 Caterpillar style Grader Blade 8. Connect wires to alternator (3).9. Connect oil pressure line.10. Connect wires to starter and glow plugs.11. Install engine side covers.12. Install air cleaner housing and hood. 4Z8131, 4Z-8131 China Replacement Motor Grader Blade Turbocharger inlet pressure is determined by measuring an electrical signal from the turbocharger inlet pressure sensors. The sensors are located in the air induction tubes. The air induction tubes are between the air filters and the turbochargers.The ECM calculates the pressure drop across the air filters by subtracting the air pressure in the air inlet system from the atmospheric pressure. If the air filter restriction exceeds the trip point, the air filter restriction warning is displayed on the monitoring panel. Caterpillar style Grader Blade BORON 5D9562, 5D-9562 3G8016, 3G-8016 China Motor Grader DBC Blades