5J6972, 4T2969 Not Serrated Machine Motor Grader Tractor Flat Blade

  • 5J6972, 4T2969 Not Serrated Machine Motor Grader Tractor Flat Blade

5J6972, 4T2969 Not Serrated Machine Motor Grader Tractor Flat Blade 5/8” X 8” X 7′ (15# 5/8”) Bolt, Motorgrader Bolt On Blade, Low Price DBF Grader Blades, CATERPILLAR Flat Grader Blade, CAT Genuine Parts Motorgrader Flat / Curved Double Bevel Blade, G.E.T Parts Boron Steel Center Blades with 6 holes, Through Hardened Heat Treated Cutting Edges for Motor Grader China Supplier

5J6972, 4T2969 Not Serrated Machine Motor Grader Tractor Flat Blade  Specifications:
Part No. 4T2969, 4T-2969, 5J6972, 5J-6972
Weight: 111 pounds 50 kg.
Information:
ABRASION RESISTANT MATERIAL N
BOLT HOLE SIZE 18 mm
CHAMFER EDGE
HOLE PATTERN OFFSET
HOLE SPACING 152.4 mm
LENGTH 2131 mm
NUMBER OF HOLES 15
THICKNESS 16 mm
TUNGSTEN CARBIDE N
WIDTH 203.2 mm

Compatible equipment models: 4T2968:
BLADE SNOW WING
MOTOR GRADER 12M 2 140M 14M 160M Caterpillar

Cat motor grader cutting edges provide the best balance of abrasion and impact resistance. Both Cat cutting edges and end bits are designed as a balanced system to move more material over a longer period with less downtime. This is accomplished by providing great strength for superior breakage resistance, and by offering maximum wear protection from both bottom and face wear on the cutting edge.

A longer bolt (6) and a thicker spacer (4) are used to fasten the sections of the exhaust manifold to the cylinder heads. See Illustration 2. This change will help maintain force that fastens the sections of the exhaust manifold to the cylinder heads.
Illustration 2 g00850650
This illustration shows the front view of a typical exhaust manifold group. (4) 203-2163 High Temperature Spacer (5) 5M-2894 Hard Washer (6) 5P-3875 Bolt (X) Exhaust Manifold (Y) Cylinder HeadAdaptable To: Two new 203-2143 Exhaust Manifold Sleeves (1) and one 127-8269 Exhaust Seal (3) replace each 1W-5499 Exhaust Manifold Sleeve in the Exhaust Manifold Groups that are identified in Table 1. Illustration 1 shows the locations of the new sleeves (1) and seals (3) in a typical exhaust manifold group.A new 203-2143 Exhaust Manifold Sleeve (2) replaces each 153-7474 Exhaust Manifold Sleeve in the Exhaust Manifold Groups that are identified in Table 1. Illustration 1 shows the locations of the new sleeves (2) in a typical exhaust manifold group. The 153-7474 Exhaust Manifold Sleeves can be reused if the inside diameter is enlarged. See Illustration 3 for the correct inside diameter.
Illustration 3 g00838928 4T2969  4T2968, 5J6971 Flat Cutting Edge for Grader 140M 14M 160M
This illustration shows a 153-7474 Exhaust Manifold Sleeve. Dimension (A) of the modified 153-7474 Exhaust Manifold Sleeve must equal 116.3 0.025 mm (4.58 0.0010 inch).One new 203-2163 High Temperature Spacer (4) and one new 5P-3875 Bolt (6) replace each 198-0230 High Temperature Spacer and 5P-3961 Bolt in the Exhaust Manifold Groups that are identified in Table 1. Illustration 2 shows the location of the new spacers and bolts in a typical exhaust manifold group. Apply a light coat of 4C-5598 High Temperature Anti-Seize to the threads of the bolts (6) before the bolts are installed. Tighten bolts (6) to a torque of 50 5 N m (37 4 lb ft).Note: Do not overtighten the bolts (6) that fasten the exhaust manifolds to the cylinder heads. The bolts may fail if the bolts are overtightened.Table 2 lists the effectivity of the new components in the machine engines. 4T2969
Table 1  5J6967, 5J-6967 DBF Motorgrader Flat Cutting Edge
Identification Of Exhaust Manifold Groups
Machine Machine
S/N Part Number Of The Exhaust Manifold Group
Machines That Are Powered By 3508 Engines
D11N 4HK, 74Z 9Y-7673  CAT 4T2966 Center Bolt On Cutting Edge for Universal Grader
D11R 8ZR
776B 6JC
776C 2TK Tractor Flat Blade
777B 4YC, 3NF
777C 4XJ   DBF style Grader Flat Blade 4T2968, 4T-2968
5130 7TJ, 5ZL
D11R AAF, 9TR, 9XR, 7PZ 121-5731
776D 5ER, AFS
777C 4XJ  5J6965, 5J-6965 High Carbon Steel Double Bevel Flat Cutting Edge
777D AGC, 3PR
5130B 4CS Tractor Flat Blade
854G AMP, 1JW 115-0550
992G 7HR, ADZ
Machines That Are Powered By 3512 Engines
784B 5RK 2W-0212
785 8GB
785B 6HK
777D HAA 2YW, AGY 103-0940
784C 2PZ  4T2967, 4T-2967 Double Bevel Motorgrader Flat Cutting Edges
785C 1HW, APX
797 5YW 155-0425
Machines That Are Powered By 3516 Engines
789 9ZC 2W-3708

More
  • Affordable Price
  • OEM Parts Available
  • Payment Easy
  • Worldwide Delivery
  • Quality Guaranteed
  • Bulk Discount

Product Range

Imperial

CUTTING EDGES
3G6289
4T6386
8K8162
9J9606
9W6608
9W6615
8294269
8294669
8294271
8294669
11082664-11
11082666-6
100-4015
100-4043
100-4044
100-6356
100-6664
100-6666
100-6668
10120745
10120752
10120757
CUTTING EDGES
138-6472
139-9230
140-0983
140-2187
140-6862
140-6863
140-6864
140-6865
140-6866
140-6867
140-6868
140-6869
140-6870
140-7601
140-80-00001
140-80-00006
144-70-11131
144-871-5130
144-920-1120
14X-71-11310
154-70-11313
154-70-11314
154-71-43190
154-72-11151
154-81-11190
154-81-11191
156-82-00001
175-70-21115
175-70-26310
17A-71-11654
17A-71-45210
17A-71-45220
17A-71-45230
17M-72-21160
195-70-12492
195-71-61550
198-71-11181

Metrics

CATERPILLAR
GRADER
135-9576-B
3 (75mm) 16 (406mm) Flat 1″ Plow Bolts
274.00
3 x 16 x 4′ (1219mm)
CATERPILLAR
GRADER
135-9797-B
3 (75mm) 16 (406mm) Flat 1″ Plow Bolts
255
3 x 16 x 4′ (1219mm)
CATERPILLAR
GRADER
9W2293
1/2 (13mm) 6 (152mm) Curved 5/8″ Plow Bolts
16.00
1/2 x 6 x 4′ (1219mm)
CATERPILLAR
GRADER
9W2295
1/2 (13mm) 6 (152mm) Curved 5/8″ Plow Bolts
20.00
1/2 x 6 x 5′ (1524mm)
CATERPILLAR
GRADER
9W2297
1/2 (13mm) 6 (152mm) Curved 5/8″ Plow Bolts
24.00
1/2 x 6 x 6′ (1828mm)
CATERPILLAR
GRADER
9W2299
1/2 (13mm) 6 (152mm) Curved 5/8″ Plow Bolts
28.00
1/2 x 6 x 7′ (2133mm)
CATERPILLAR
GRADER
9W2301
1/2 (13mm) 6 (152mm) Curved 5/8″ Plow Bolts
31.00
1/2 x 6 x 8′ (2438mm)
CATERPILLAR
GRADER
9W2393
1/2 (13mm) 6 (152mm) Curved 5/8″ Plow Bolts
39.00
1/2 x 6 x 10′ (3048mm)
CATERPILLAR
GRADER
9W2305
1/2 (13mm) 6 (152mm) Curved 5/8″ Plow Bolts
47.00
1/2 x 6 x 12′ (3658mm)
CATERPILLAR
GRADER
9W2307
1/2 (13mm) 6 (152mm) Curved 5/8″ Plow Bolts
55.00
1/2 x 6 x 14′ (4267mm)
CATERPILLAR
GRADER
9W2294
1/2 (13mm) 6 (152mm) Curved 3/4″ Plow Bolts
16.00
1/2 x 6 x 4′ (1219mm)
CATERPILLAR
GRADER
9W2296
1/2 (13mm) 6 (152mm) Curved 3/4″ Plow Bolts
20.00
1/2 x 6 x 5′ (1524mm)
CATERPILLAR
GRADER
9W2298
1/2 (13mm) 6 (152mm) Curved 3/4″ Plow Bolts
24.00
1/2 x 6 x 6′ (1828mm)
CATERPILLAR
GRADER
9W2300
1/2 (13mm) 6 (152mm) Curved 3/4″ Plow Bolts
28.00
1/2 x 6 x 7′ (2133mm)
CATERPILLAR
GRADER
9W2302
1/2 (13mm) 6 (152mm) Curved 3/4″ Plow Bolts
31.00
1/2 x 6 x 8′ (2438mm)
CATERPILLAR
GRADER
9W2304
1/2 (13mm) 6 (152mm) Curved 3/4″ Plow Bolts
39.00
1/2 x 6 x 10′ (3048mm)
CATERPILLAR
GRADER
9W2306
1/2 (13mm) 6 (152mm) Curved 3/4″ Plow Bolts
47.00
1/2 x 6 x 12′ (3658mm)
CATERPILLAR
GRADER
9W2308
1/2 (13mm) 6 (152mm) Curved 3/4″ Plow Bolts
55.00
1/2 x 6 x 14′ (4267mm)
CATERPILLAR
GRADER
9W2325
5/8 (16mm) 6 (152mm) Curved 5/8″ Plow Bolts
20.00
5/8 x 6 x 4′ (1219mm)
CATERPILLAR
GRADER
7T1640
5/8 (16mm) 6 (152mm) Curved 5/8″ Plow Bolts
24.00
5/8 x 6 x 5′ (1524mm)
CATERPILLAR
GRADER
7T1633
5/8 (16mm) 6 (152mm) Curved 5/8″ Plow Bolts
29.00
5/8 x 6 x 6′ (1828mm)
CATERPILLAR
GRADER
5B9561 / 5B9562
5/8 (16mm) 6 (152mm) Curved 5/8″ Plow Bolts
34.00
5/8 x 6 x 7′ (2133mm)
CATERPILLAR
GRADER
7T1645
5/8 (16mm) 6 (152mm) Curved 5/8″ Plow Bolts
34.00
5/8 x 6 x 7′ (2133mm)
CATERPILLAR
GRADER
7T1632
5/8 (16mm) 6 (152mm) Curved 5/8″ Plow Bolts
39.00
5/8 x 6 x 8′ (2438mm)
CATERPILLAR
GRADER
9W2326
5/8 (16mm) 6 (152mm) Curved 3/4″ Plow Bolts
20.00
5/8 x 6 x 4′ (1219mm)
CATERPILLAR
GRADER
9W2327
5/8 (16mm) 6 (152mm) Curved 3/4″ Plow Bolts
24.00
5/8 x 6 x 5′ (1524mm)
CATERPILLAR
GRADER
7T1637
5/8 (16mm) 6 (152mm) Curved 3/4″ Plow Bolts
29.00
5/8 x 6 x 6′ (1828mm)
CATERPILLAR
GRADER
7T1626
5/8 (16mm) 6 (152mm) Curved 3/4″ Plow Bolts
34.00
5/8 x 6 x 7′ (2133mm)
CATERPILLAR
GRADER
7T1629
5/8 (16mm) 6 (152mm) Curved 3/4″ Plow Bolts
39.00
5/8 x 6 x 8′ (2438mm)
CATERPILLAR
GRADER
9W2331
3/4 (19mm) 6 (152mm) Curved 5/8″ Plow Bolts
24.00
3/4 x 6 x 4′ (1219mm)
CATERPILLAR
GRADER
7T1642
3/4 (19mm) 6 (152mm) Curved 5/8″ Plow Bolts
30.00
3/4 x 6 x 5′ (1524mm)
CATERPILLAR
GRADER
7T1635
3/4 (19mm) 6 (152mm) Curved 5/8″ Plow Bolts
36.00
3/4 x 6 x 6′ (1828mm)
CATERPILLAR
GRADER
7T1644
3/4 (19mm) 6 (152mm) Curved 5/8″ Plow Bolts
42.00
3/4 x 6 x 7′ (2133mm)
CATERPILLAR
GRADER
9W2336
3/4 (19mm) 6 (152mm) Curved 5/8″ Plow Bolts
48.00
3/4 x 6 x 8′ (2438mm)
CATERPILLAR
GRADER
9W2332
3/4 (19mm) 6 (152mm) Curved 3/4″ Plow Bolts
24.00
3/4 x 6 x 4′ (1219mm)
CATERPILLAR
GRADER
9W2333
3/4 (19mm) 6 (152mm) Curved 3/4″ Plow Bolts
30.00
3/4 x 6 x 5′ (1524mm)
CATERPILLAR
GRADER
9W2334
3/4 (19mm) 6 (152mm) Curved 3/4″ Plow Bolts
36.00
3/4 x 6 x 6′ (1828mm)
CATERPILLAR
GRADER
9W2335
3/4 (19mm) 6 (152mm) Curved 3/4″ Plow Bolts
42.00
3/4 x 6 x 7′ (2133mm)
CATERPILLAR
GRADER
9W2337
3/4 (19mm) 6 (152mm) Curved 3/4″ Plow Bolts
48.00
3/4 x 6 x 8′ (2438mm)
CATERPILLAR
GRADER
9W2309
1/2 (13mm) 8 (203mm) Curved 5/8″ Plow Bolts
22.00
1/2 x 8 x 4′ (1219mm)

error: HCEPARTS Content is protected !!