5D1163 GET Motorgrader 16 RIGHT HAND Edge

5D1163 GET Motorgrader 16 RIGHT HAND Edge, CATERPILLAR Curved Grader Blade, CAT Genuine Parts Motorgrader Curved Double Bevel Blade, G.E.T Parts Boron Steel Blades with 8 holes, Through Hardened Heat Treated Cutting Edges for Motor Grader China Supplier

5D1163 GET Motorgrader 16 RIGHT HAND Edge Specifications:
Part No. 5D1163 , 5D-1163
OEM
5D1163
Manufacturer
Caterpillar
Machine
Grader

A 203mm Material HIGH CARBON
B 16mm Diameter 5/8″
C 2438mm Tooth
D Holes 17
E Class
F
G
R
Weight 55,8Kg

Compatible equipment models: 5D9731:
MOTOR GRADER 16 Caterpillar

Material: Manganese steel, boron steel
Thickness: 13mm; 16mm; 19mm; 25mm.
Width: 152mm and 203mm.
Length: 4=1219mm; 5=1524mm; 6=1828mm; 7=2133mm; 8=2438mm.
Bolts Dia: 3/4; 5/8
Adaptable for most of graders in market, including Komatsu, Caterpillar, Hitachi, Sumitomo, Kato, Daewoo, etc, also could be designed and produced by clients’ drawing.
Mechanical properties of products could reach international standard after quenching and tempering heat treatment.
Thanks to our high quality raw material and professional heat treatment, our products’ wear life and performance of are 15% ~ 20% higher than most of other similar products in market.
Trade Terms: FOB NINGBO.
Payment Terms: 30% prepaid, T/T at the sight of copy of B/L.

Offer for instant purchase has cost one hundred and six dollars, forty-six cents, condition of spare part – aftermarket.
Specifications: weight (lbs) 1. For these characteristics delivery equals fifty-seven dollars, seven cents. Abrasion Resistance 9 Holes Caterpillar Spare Parts Curved Cutting Edge 7T1643, 9W2309 Relacement Caterpillar Edge Cutting for Motorgrader, 8D2787, 8D-2787 Curved Blade for Construction Equipment Motor Grader
Part number 5D9558 EDGE-CUTTING BORON refers to: Ground engaging, Edges. High Carbon Curved Cutting Edge Grader Blade 9W-2302, 9W2302, 9W2302 High Carbon Curved Motor Grader Blade, 8D2787, 8D-2787 Caterpillar Curved Cutting Edges for Grader Equipment, 8D2786, 8D-2786 Curved Blade for Motorgrader with 13 Holes, MOUNTING fit CATERPILLAR Motorgrader Curved Blade 8D2786 4T2237

Required Tools
Tool Part Number Part Description Qty
A(1) 9U-6198 Crankshaft Turning Tool 1
A(2) 9U-7336 Housing 1
5P-7305 Engine Turning Tool 1 Caterpillar 4T2237 8FT Grader Blades
(1) The Crankshaft Turning Tool is used on the front pulley.  5B5564, 5B-5564 High Carbon Curved Cutting Edge for Grader
(2) This Tool is used in the aperture for the electric starting motor.Note: Either Tooling (A) can be used. Use the Tooling that is most suitable.
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 2 g02011713 CARBON LEVEL BLADE CURVED 4Z8968 4Z8653 4Z8652
Clean the piston cooling jets and inspect the piston cooling jets for damage. Ensure that the valve is free to move within each piston cooling jet. Replace any damaged piston cooling jets. The procedure for checking that the alignment of the piston cooling jets is described in Specifications, “Piston Cooling Jet Alignment” for more information.
If the crankshaft is installed, use Tooling (A) to rotate the crankshaft in order to access the mounting flange for the piston cooling jet.
Install a new O-ring seal (3) (not shown) onto piston cooling jet (2).  5D9561, 5D-9561 Carbon Curved Cutting Edge for Motor Grader
Install piston cooling jet (2) into the oil passage in the cylinder block. Note: Ensure that the piston cooling jet is correctly installed into the oil passage in the cylinder block before tightening the bolt.
Install bolt (1). Tighten the bolt to a torque of 9 N m (80 lb in).
Repeat Step 2 through Step 4 in order to install the remaining piston cooling jets. End By:
Install the engine oil pump. Refer to Disassembly and Assembly, “Engine Oil Pump – Install” for the correct procedure.