5D1163, 5D-1163 Caterpillar Right Hand Grader Blade

  • 5D1163, 5D-1163 Caterpillar Right Hand Grader Blade

5D1163, 5D-1163 Caterpillar Right Hand Grader Blade 17# 5/8″ Bolt, Motorgrader Bolt On Blade, Low Price Dbc Grader Blades, CATERPILLAR Curved Grader Blade, CAT Genuine Parts Motorgrader Curved Double Bevel Blade, G.E.T Parts Boron Steel Center Blades with 6 holes, Through Hardened Heat Treated Cutting Edges for Motor Grader China Supplier

5D1163, 5D-1163 Caterpillar Right Hand Grader Blade Specifications:
Part No. 5D1163, 5D-1163
OEM
5D1163
Manufacturer
Caterpillar
Machine
Grader

A 203mm Material HB500
B 16mm Diameter 5/8″
C 2438mm Tooth
D Holes 17
E Class
F
G
R
Weight 55,8Kg

Cutting Edges
• Complete line of curved double bevel (CDB) cutting edges for every make and model
• CDB sizes range from 1/2″ x 6″ for light grading up to heavy-duty 1″ x 8″ CDB section for greater wear life
• Flame-hardened grader cutting edges with surface hardness up to 62 RC, provides max mum wear resistance
• XHD flat grader blades are available in sizes 3/4″ x 8″ through 3″ x 16″ FDB
• Select serrated grader blades are available for frozen or hard packed ground conditions

2. Remove engine side covers. Disconnect wires (3) from starter. Put a mark on wires for identification.3. Disconnect wire for the glow plugs. Disconnect line for oil pressure gauge.4. Disconnect wires from alternator. Put a mark on wires for identification.5. Disconnect line (2) for air cleaner indicator and line (1) for water temperature gauge.6. Disconnect the control linkage from the governor.7. Remove the clamp from hydraulic oil lines. 8. Remove floor plates and disconnect the wires from the transmission safety switch (4). 9. Remove support (5) for the floor plates.10. Disconnect line for torque converter temperature gauge.11. Remove the bolts that hold the dash to fuel tank and hydraulic tank. 12. Fasten a hoist and remove bolt that holds dash to frame. Remove dash. Weight is 240 lb. (108 kg).Install Dash Panel (D3 Only)  5B5562, 5B-5562 Caterpillar Double Bevel Curve Blade
1. Fasten a hoist and put the dash (1) in position on the machine. Install the bolts that hold the dash to the frame and tanks.2. Connect a line for torque converter temperature gauge. 3. Install the support (2) for the floor plates.4. Connect the wires to the transmission safety switch and install floor plates.5. Install clamp on hydraulic lines.6. Connect control linkage to governor (4).7. Connect line for air cleaner indicator. 8. Connect wires to alternator (3).9. Connect oil pressure line.10. Connect wires to starter and glow plugs.11. Install engine side covers.12. Install air cleaner housing and hood. 4Z8131, 4Z-8131 China Replacement Motor Grader Blade Turbocharger inlet pressure is determined by measuring an electrical signal from the turbocharger inlet pressure sensors. The sensors are located in the air induction tubes. The air induction tubes are between the air filters and the turbochargers.The ECM calculates the pressure drop across the air filters by subtracting the air pressure in the air inlet system from the atmospheric pressure. If the air filter restriction exceeds the trip point, the air filter restriction warning is displayed on the monitoring panel. 3G8016, 3G-8016 China Motor Grader DBC Blades

More
  • Affordable Price
  • OEM Parts Available
  • Payment Easy
  • Worldwide Delivery
  • Quality Guaranteed
  • Bulk Discount

Product Range

Imperial

CUTTING EDGES
3G6289
4T6386
8K8162
9J9606
9W6608
9W6615
8294269
8294669
8294271
8294669
11082664-11
11082666-6
100-4015
100-4043
100-4044
100-6356
100-6664
100-6666
100-6668
10120745
10120752
10120757
CUTTING EDGES
138-6472
139-9230
140-0983
140-2187
140-6862
140-6863
140-6864
140-6865
140-6866
140-6867
140-6868
140-6869
140-6870
140-7601
140-80-00001
140-80-00006
144-70-11131
144-871-5130
144-920-1120
14X-71-11310
154-70-11313
154-70-11314
154-71-43190
154-72-11151
154-81-11190
154-81-11191
156-82-00001
175-70-21115
175-70-26310
17A-71-11654
17A-71-45210
17A-71-45220
17A-71-45230
17M-72-21160
195-70-12492
195-71-61550
198-71-11181

Metrics
error: HCEPARTS Content is protected !!