4T9776WN Caterpillar Ripper Shank Nose Piece

4T9776WN Caterpillar Ripper Shank Nose Piece, Cat ADAPTER NOSE, Caterpillar style weld on nose for a D8 or a D9 ripper shank, Caterpillar Style Bucket Weld-on Nose, Cat GET PARTS, WELD ON BUCKET TEETH AND ADAPTER, Nose Weld On Adapter Bucket Teeth For Excavator, Ground Engaging Tools China Supplier

4T9776WN Caterpillar Ripper Shank Nose Piece Specifications:
1.Part NO.: 4T9776WN
2.Net Weight: 36.88 lb / 16.73 kg
3.Color: yellow or as require
4.material: Alloy steel with Cr,Mn,Mo,Ni,…
5.Technique: Precision casting
6.Certification: ISO9001:2008, ISO14001
7.Outer Packing: Iron or wooden cartons
Caterpillar style weld on nose for a J450 series bucket tooth, takes an 8E0468 pin and an 8E8469 sleeved retainer; Use Item # 8E6464WN

Weld On Noses Adapter Details – Inches (mm)

* Larger pin diameter for oversize fastener

We focus on offering bucket teeth, adapters, blades,cutting edge,end bits,power bolt and etc which applied to Construction Machinery (Excavator, dozer, grader, loader…)

Our main market are focusing on fine quality products in the markets in North and South America, Europe, australia, as well as some africa and asia countries or regions.
Our products have a good reputation among this industry.
Once you have any requirement please feel free to contact us, we sure will be your reliable partner.
OUR ADVANTAGES:
Over 200 skilled workers, about 250000 square meters non-dust workshop, 30 years experience, 7 years’ vendor of CatPillar, ISO certificated, one hour reach Ningbo Port. Adco style Weld-on Nose 3010LWN,  Adco Center Bucket Weld-on Nose 3010WNRC, Right Hand Weld-on Bucket NOSE PIECE for Excavator

Mechanical Property of Our Products

CARBIDE TIPPED CUTTING TOOLS, CONICAL BITS & BOARDS for Scarifier Grader Blade Systems
DURABILITY – Tungsten Carbide Tipped cutting tools outlast all-steel blades SAVE TIME – worn cutting tools may be replaced individually and independantly of the blade sec-
tion & bolts, without the need for special tools! LONGER LIFE – rotating cutting tools are self-sharpening for more uniform wear and longer life. ENSURE EVEN CUTTING HEIGHT – even cutting height is maintained as cutting tools may be rotated form position to position PROVEN PERFORMANCE & VERSATILITY – Exceptional cutting action proven on even the tough test surfaces; • Tar sand road reclamation • Dirt & gravel road maintenance • Spot asphalt milling • Hard-packed snow & ice removal • Mising calcium chloride, magnesuium chloride or other dust suppressants. • Chip & seal road reclamation
BLADE SELECTION GUIDE FOR VARIOUS MOLDBOARD LENGTHS
Use the following table to determine the length and number of blades required to outfit your grader with a scarifier system. (The length of your moldboard determines how many 3ft. or 4ft blade sections you will need.) ALSO AVAILABLE: Moldboard Reducer Bushings (reduces 3/4’’ holes to 5/8’’ holes)
SIZE & QUANTITY OF SCARIFIER NUMBER OF BLADE SECTIONS REQUIRED LENGTH OF CUTTING MOLDOARD FOR 1 MOLDBOARD ASSEMBLY TOOLS 3 Ft (914mm) 4 Ft (1219mm) REQUIRED Sections Sections 12 Ft 0 3 72 13 Ft 3 1 78 14 Ft 2 2 84 16 Ft 0 4 96. Caterpillar Nose Piece for J450 Series Bucket Tooth 8E6464WN 3G4454WN

1/2’’ NUT 1/2’’ X 2-1/2’’ PLOW BOLT 5/8’’ NUT 5/8’’ FLAT WASHER 5/8’’ LOCK WASHER 5/8’’ X 2’’ PLOW BOLT 5/8’’ X 2-1/4’’ PLOW BOLT 5/8’’ X 2-1/2’’ PLOW BOLT 5/8’’ X 2-3/4’’ PLOW BOLT 5/8’’ X 3’’ PLOW BOLT 5/8’’ X 3-1/2’’ PLOW BOLT 5/8’’ X 4’’ PLOW BOLT 5/8’’ X 4’’ PLOW BOLT 3/4’’ NUT 3/4’’ FLAT WASHER 3/4’’ LOCK WASHER 3/4’’ HEAD X 5/8’’ SHAFT X 2-1/4’’ REDUCER BOLT 3/4’’ X 2-1/4’’ PLOW BOLT 3/4’’ X 2-1/2’’ PLOW BOLT 3/4’’ X2-3/4’’ PLOW BOLT 3/4’’ X 3’’ PLOW BOLT 3/4’’ X 3-3/4’’ PLOW BOLT 7/8’’ NUT 7/8’’ X 3’’ PLOW BOLT 7/8’’ X 3-1/2’’ PLOW BOLT 7/8’’ X 4-1/4’’ PLOW BOLT 1’’ NUT 1’’ X 3’’ PLOW BOLT 1’’ X 3-1/2’’ PLOW BOLT 1’’ X 3-3/4’’ PLOW BOLT 1’’ X 4’’ PLOW BOLT 1-1/4’’ NUT 1-1/4’’ X 4’’ PLOW BOLT 1-1/4’’ X 4-1/2’’ PLOW BOLT 1-1/4’’ X 5’’ PLOW BOLT