4T2240, 4T-2240 China Motor Grader Bolt On Blades

  • 4T2240, 4T-2240 China Motor Grader Bolt On Blades

4T2240, 4T-2240 China Motor Grader Bolt On Blades 11# 5/8″ Bolt, Motorgrader Bolt On Blade, Low Price Dbc Grader Blades, CATERPILLAR Curved Grader Blade, CAT Genuine Parts Motorgrader Curved Double Bevel Blade, G.E.T Parts Boron Steel Center Blades with 6 holes, Through Hardened Heat Treated Cutting Edges for Motor Grader China Supplier

4T2240, 4T-2240 China Motor Grader Bolt On Blades Specifications:
Part No.   4T2240, 4T-2240
Weight: 125 pounds 56 kg.
Information:
BEVEL ANGLE 33
BOLT HOLE SIZE 18 mm
HOLE SPACING 152.4 mm
LENGTH 1521.6 mm
NUMBER OF HOLES 11
THICKNESS 25.4 mm
WIDTH 203.2 mm

A 152mm Material HB500
B 13mm Diameter 5/8″
C 1219mm Tooth
D Holes 9
E Class
F
G
R
Weight 15,8Kg

Cutting Edges
• Complete line of curved double bevel (CDB) cutting edges for every make and model
• CDB sizes range from 1/2″ x 6″ for light grading up to heavy-duty 1″ x 8″ CDB section for greater wear life
• Flame-hardened grader cutting edges with surface hardness up to 62 RC, provides max mum wear resistance
• XHD flat grader blades are available in sizes 3/4″ x 8″ through 3″ x 16″ FDB
• Select serrated grader blades are available for frozen or hard packed ground conditions

The ECM monitors the engine coolant temperature by measuring an electrical signal from the engine coolant temperature sensor. The coolant temperature sensor is located in the housing for the coolant temperature regulators. The ECM compares actual coolant temperature to the maximum allowable limit. If the temperature of the engine coolant exceeds the trip point, the ECM will send the high coolant temperature warning to the monitoring panel. The warning will remain activated until the coolant temperature drops below the hysteresis. The event is logged in the permanent ECM memory. Factory passwords are required to clear this information.Low Engine Coolant Temperature
To trigger a low engine coolant temperature event the temperature must first go over 75° C continuously for ten minutes then fall below 70° C for two continuous minutes. There is no modification of this trip point in ET.Engine Overspeed
The ECM determines the engine speed by measuring an electrical signal from the speed/timing sensor. The sensor is located on the flywheel housing. The sensor is next to the left camshaft drive gear. If engine speed exceeds the trip point, an operator warning is given. The warning will remain active until the engine speed drops below the hysteresis. The peak engine overspeed is logged in the permanent ECM memory. The peak engine overspeed is logged as a histogram in order to quantify the magnitude of the engine overspeed. The histogram provides information in order to assess the potential level of engine damage. Factory passwords are required to clear this information.Air Inlet Restriction  3G7965, 3G-7965 CARBON Curved Grader Blade
The ECM determines the atmospheric pressure by measuring an electrical signal from the atmospheric pressure sensor. The sensor is located on the mounting bracket for the ECM on the left side of the engine near the starting motors. Turbocharger inlet pressure is determined by measuring an electrical signal from the turbocharger inlet pressure sensors. The sensors are located in the air induction tubes. The air induction tubes are between the air filters and the turbochargers.The ECM calculates the pressure drop across the air filters by subtracting the air pressure in the air inlet system from the atmospheric pressure. If the air filter restriction exceeds the trip point, the air filter restriction warning is displayed on the monitoring panel.

More
  • Affordable Price
  • OEM Parts Available
  • Payment Easy
  • Worldwide Delivery
  • Quality Guaranteed
  • Bulk Discount

Product Range

Imperial

CUTTING EDGES
3G6289
4T6386
8K8162
9J9606
9W6608
9W6615
8294269
8294669
8294271
8294669
11082664-11
11082666-6
100-4015
100-4043
100-4044
100-6356
100-6664
100-6666
100-6668
10120745
10120752
10120757
CUTTING EDGES
138-6472
139-9230
140-0983
140-2187
140-6862
140-6863
140-6864
140-6865
140-6866
140-6867
140-6868
140-6869
140-6870
140-7601
140-80-00001
140-80-00006
144-70-11131
144-871-5130
144-920-1120
14X-71-11310
154-70-11313
154-70-11314
154-71-43190
154-72-11151
154-81-11190
154-81-11191
156-82-00001
175-70-21115
175-70-26310
17A-71-11654
17A-71-45210
17A-71-45220
17A-71-45230
17M-72-21160
195-70-12492
195-71-61550
198-71-11181

Metrics
error: HCEPARTS Content is protected !!