122-8618 D6 Dozer Corner Blade 35mm RH Extended Wear Life General Duty END BIT 35mm, Caterpillar genuine D6 leave cut / hot cup corner end edges, CAT Bolt On Bucket Wear End Cutting Edge, Left Right Hand Dozer End Bits, G.E.T Spare Parts, Replacement Caterpillar Bolt-On Bucket Blade End Bits China Supplier 122-8618 D6 Dozer […]
3G8264 Bolt-on Center Cutting Edge, Caterpillar Bulldozer D8 Cutting Edges, Bucket Cutting Edge, Spare Parts Cutting Edge for Caterpillar D8, Heat Treating Dozer Cutting Edge End Bit China Factory
3G8264 Bolt-on Center Cutting Edge Feature:
CAT Part No.: 3G8264
Type: Center Edge
Size: 1.125” thick * 13” wide * 53.25” length
Material: High carbon steel or Boron steel
Hole No. (Bolt and Nuts): 7 Holes
Compatible Machine Models: CAT D5 Bulldozer
Made in China
Caterpillar style bolt on center cutting edge for a D8 Caterpillar Bulldozer. This is a double beveled reversible bucket cutting edge that is 1.125” thick, 13” wide and 53.25” in length. It takes 9 of a 1” X 3 1/4” (100X325) plow bolt and 9 of a 1” (100 HEscoNUT) hex nut. The bolt hole spacing is 6” from center to center of the bolt holes, and 2.63” when measured from the edge of the bucket cutting edge to the center of the first hole. Use Item # 4T6381Weight: 70.99 lb / 32.2 kg
HCEPARTS manufactures longer wearlife tungsten carbide impregnated Bolt-on and Weld-on Cutting Edges for all front end loader buckets. Bolt-on cutting edges are available in both single edge and double edge configurations. Weld-on Cutting Edges are single edge style only.
Many popular cutting edges are in stock, ready for direct OEM replacement on machines including Caterpillar, Deere, Kawasaki, Komatsu, and VME.
HCEPARTS can provide custom tungsten carbide patterns to meet special wear conditions for any cutting edge. Product literature (PDF). 2Y2329 Caterpillar D8H Bulldozer End Cutting Edge
Half Arrow Style Cutting Edges
In certain applications half arrow style cutting edges have proven to be cost effective in fighting wear. They offer extra protection of the bucket base edge, as material is beveled over the leading edge.
HCEPARTS Half Arrow edges are fabricated using quality steel plate. All other manufacturers’ half arrow edges are cast, thus subject to inconsistent quality, fit problems, lack of availability, and long lead times. HCEPARTS Half Arrow edges are fabricated from quality steel plate and tungsten carbide impregnated for maximum wearlife. They are available with the same fast lead time as conventional Kenco cutting edges.
Features and Benefits:
Impregnated to a minimum depth of .25″ with crushed Tungsten Carbide for longer wearlife
Tungsten carbide provides a wear surface hardness of 90 Rockwell A
Half Arrow edges are fabricated from quality steel plate, not cast
Many popular cutting edges in stock for direct OEM replacement
Available in both single edge and double edge configurations
Can be custom designed to meet customer needs or wear conditions