217-4826 657E 657G Caterpillar Scraper Serrated Center Blade

  • 217-4826 657E 657G Caterpillar Scraper Serrated Center Blade

217-4826 657E 657G Caterpillar Scraper Serrated Center Blade, Scraper Center Serrated Blade, Carbon Steel OR Boron Steel Scraper Blades & End Bits, double beveled reversible bucket cutting edge, CAT WHEEL TRACTOR-SCRAPER Blade Edge Adapter, Bucket Center and Side Cutting Edges fits Caterpillar, Excavator Spare Parts Blade Cutting Edges End Bits China Supplier Factory

217-4826 657E 657G Caterpillar Scraper Serrated Center Blade Parameter:
Part No.    217-4826, 2174826
Weight: 579 pounds 262 kg.
OEM
217-4826
Manufacturer
Caterpillar
Machine
Scraper

A 558,7mm Material HB500
B 45mm Diameter 1″
C 1822mm Tooth
D Holes 36

Compatible equipment models: 2174826:
WHEEL SCRAPER 657E 657G Caterpillar

Scraper cutting edges features:
OEM part number or custom design
Heat treated 16Mn or C45 and heat treated 30MnB boron steel
Weld on or bolt on cutting edge and end bit
Cutting edge thickness 13-100mm

directional shift management function reduces stresses on the driveline. When the operator shifts the transmission out of neutral or the operator shifts the transmission through neutral the following action will occur:
The Transmission/Chassis ECM sets the desired engine throttle speed to low idle briefly if the engine speed is greater than 1350 rpm.The control records an abuse event when the conditions that are listed below are present.
The operator shifts the transmission out of neutral or the operator shifts the transmission through neutral when the engine speed is greater than 1500 rpm. In this case, the engine speed was so high that the brief override of the throttle will not be sufficient to prevent this shift from being abusive.Note: Shifts into neutral at high engine speeds are not abusive. Shifts into neutral do not trigger the abusive shift logic. 159-0375 Caterpillar 657G WHEEL SCRAPER ARM CUTTING EDGE
268-2 Programmed Parameter Fault: Data Erratic, Intermittent, or Incorrect Backhoe Loader models have multiple engine options corresponding to a single serial number prefix. Programming both the Product ID and Engine Configuration Code are necessary to define the machine configuration fully. If either the machine variant or engine variant cannot be identified, the system inhibits operation of the machine. Possible causes for an FMI 2 Diagnostic Code are:
A valid Product ID has not been properly programmed into the Machine ECM.  159-0374 Caterpillar 657G WHEEL SCRAPER CUTTING EDGE ARM
The Engine ECM configuration code was not properly programmed in the ECM.
If an ECM was recently replaced, the wrong unit may have been installed.Engine Configuration Code Table
The Engine Configuration Code (ECC) takes the form of a two-digit numeric value. Each value represents a particular engine model, engine power, and emission tier as defined in the table below:
ECC Engine Model Engine Power (kW) Emissions Tier Engine Type
20 C4.4 68.5 2 Mechanical
21 C4.4 74.5 2 Mechanical
30 C4.4 70 3 Mechanical
31 C4.4 74.5 3 Mechanical
40 C3.4B 55 4 Electronic
42 C4.4 70 4 Electronic
44 C4.4 74.5 4 Electronic
46 C4.4 86 4 Electronic
48 C4.4 82 4 Electronic Diagnostic Trouble Code Procedure

More
  • Affordable Price
  • OEM Parts Available
  • Payment Easy
  • Worldwide Delivery
  • Quality Guaranteed
  • Bulk Discount

Product Range

Imperial

Supplies the following Blades/Cutting Edges/End Bits for CAT scraper.

Scraper 4T2882
Scraper 4T2883
Scraper 8F7232
Scraper 4T6626
Scraper 4T2940
Scraper 4T2953
Scraper 9F1831
Scraper 4T6625
Scraper 4T2939
Scraper 4T6627
Scraper 4T2942
Scraper 4T2962
Scraper 4T2965
Scraper 4T2874
Scraper 4T2881
Scraper 4T2884
Scraper 5J6909
Scraper 5J6911
Scraper 4T6622
Scraper 4T6624
Scraper 4T6565
Scraper 4T6612
Scraper 4T6617
Scraper 8F7232
Scraper 4T2900
Scraper 4T6380
Scraper 4T6620
Scraper 4J8665
Scraper 4J8665TR
Scraper 4T2887
Scraper 4T2895
Scraper 5J6869
Scraper 1J3599
Scraper 1J1724
Scraper 1J1299
Scraper 1J1300
Scraper 2J9193
Scraper 2J9194
Scraper 4T6621
Scraper 4T6567
Scraper 4T2891
Scraper 4T2894
Scraper 4T2894TR
Scraper 2J9193
Scraper 5J6875
Scraper 5J6821
Scraper 4T6566
Scraper 136-8752
Scraper 4T3444
Scraper 137-9679
Scraper 4T6611
Scraper 4T6613
Scraper 4T4336
Scraper 9W4903
Scraper 9W5807
Scraper 9W5806
Scraper 9W5810
Scraper 7T5104
Scraper 7T5105
Scraper 195-5131
Scraper 140-6778
Scraper 144-1340
Scraper 4T6568
Scraper 4T2896
Scraper 140-6779
Scraper 195-7279
Scraper 140-6767
Scraper 257-1857
Scraper 257-1870
Scraper 132-4566
Scraper 132-4567
Scraper 5J2171
Scraper 5J2172
Scraper 4T7667
Scraper 4T7668
Scraper 4T6614
Scraper 138-6443
Scraper 138-6443TR
Scraper 138-6444
Scraper 7J3023
Scraper 143-3065
Scraper 220-9150
Scraper 9J4369
Scraper 138-6445
Scraper 195-5132
Scraper 208-8872
Scraper 7J0225
Scraper 220-9150
Scraper 6W6092
Scraper 138-6446
Scraper 9J5899
Scraper 7J4227
Scraper 7J4228
Scraper 3J6939
Scraper 3J6940
Scraper 4J6773
Scraper 4J6774
Scraper 4J8665
Scraper 4T6372
Scraper 7J2958
Scraper 7J2959
Scraper 4T6319
Scraper 4T6318
Scraper 9J1111
Scraper 9J1109
Scraper 4T3428
Scraper 140-6764
Scraper 4T2899
Scraper 140-6765
Scraper 9J1111
Scraper 136-8776
Scraper 4T6314
Scraper 7J2957
Scraper 7J2978
Scraper 4T2892
Scraper 140-6762
Scraper 4T3429
Scraper 140-6763
Scraper 4J8225
Scraper 7J3192
Scraper 4T2887
Scraper 4J8226
Scraper 9W4091
Scraper 9W9042
Scraper 9W9701
Scraper 9W9702
Scraper 159-0374
Scraper 159-0375
Scraper 217-4826
Scraper 217-4843
Scraper 9W4505
Scraper 9W4399
Scraper 4T0668
Scraper 9W4394
Scraper 9W4509
Scraper 236-7178
Scraper 236-7179
Scraper 7J1551
Scraper 7J0226
Scraper 7J2977
Scraper 7J2981
Scraper 4T2882MT
Scraper 4T2883MT
Scraper 8F7232MT
Scraper 4T6626
Scraper 4T2940
Scraper 4T2953MT
Scraper 9F1831MT
Scraper 4T6625MT
Scraper 4T2939
Scraper 9F1831
Scraper 4T6627MT
Scraper 4T2942MT
Scraper 4T2962
Scraper 4T2965
Scraper 4T2874
Scraper 4T2881
Scraper 4T2884
Scraper 5J6909
Scraper 5J6911
Scraper 4T6622MT
Scraper 4T6624MT
Scraper 4T6565MT
Scraper 4T6612MT
Scraper 4T6617MT
Scraper 8F7232MT
Scraper 4T2900MT
Scraper 4T6380MT
Scraper 4T6620MT
Scraper 4J8665MT
Scraper 4J8665TR
Scraper 4T2887MT
Scraper 4T2895MT
Scraper 5J6869
Scraper 1J3599MT
Scraper 1J1724
Scraper 1J1299
Scraper 1J1300
Scraper 2J9193
Scraper 2J9194
Scraper 4T6621MT
Scraper 4T6567MT
Scraper 4T2891MT
Scraper 4T2894MT
Scraper 4T2894TR
Scraper 2J9193
Scraper 5J6875MT
Scraper 5J6821MT
Scraper 4T6566MT
Scraper 136-8752MT
Scraper 4T3444MT
Scraper 137-9679MT
Scraper 4T6611MT
Scraper 4T6613MT
Scraper 4T4336MT
Scraper 9W4903MT
Scraper 9W5807MT
Scraper 9W5806MT
Scraper 9W5810MT
Scraper 7T5104MT
Scraper 7T5105MT
Scraper 195-5131MT
Scraper 140-6778
Scraper 144-1340
Scraper 4T6568MT
Scraper 4T2896MT
Scraper 140-6779
Scraper 195-7279MT
Scraper 140-6767
Scraper 257-1857MT
Scraper 257-1870MT
Scraper 132-4566MT
Scraper 132-4567MT
Scraper 5J2171
Scraper 5J2172
Scraper 4T7667MT
Scraper 4T7668MT
Scraper 4T6614MT
Scraper 138-6443TR
Scraper 138-6444
Scraper 7J3023MT
Scraper 143-3065
Scraper 220-9150
Scraper 9J4369MT
Scraper 138-6445
Scraper 195-5132
Scraper 208-8872
Scraper 7J0225MT
Scraper 220-9150
Scraper 6W6092MT
Scraper 138-6446
Scraper 9J5899MT
Scraper 7J4227MT
Scraper 7J4228MT
Scraper 3J6939
Scraper 3J6940
Scraper 4J6773MT
Scraper 4J6774MT
Scraper 4J8665TR
Scraper 4J8665MT
Scraper 4T6372MT
Scraper 4J8665
Scraper 7J2958MT
Scraper 7J2959MT
Scraper 4T6319MT
Scraper 4T6318MT
Scraper 9J1111MT
Scraper 9J1109MT
Scraper 4T3428MT
Scraper 140-6764
Scraper 4T2899MT
Scraper 140-6765MT
Scraper 9J1111MT
Scraper 136-8776MT
Scraper 4T6314MT
Scraper 7J2957MT
Scraper 7J2978MT
Scraper 220-9150MT
Scraper 4T2892MT
Scraper 140-6762
Scraper 4T3429MT
Scraper 140-6763
Scraper 4J8225MT
Scraper 7J3192MT
Scraper 4T2887MT
Scraper 4J8226MT
Scraper 9W4091MT
Scraper 9W9042MT
Scraper 9W9701MT
Scraper 9W9702MT
Scraper 159-0374
Scraper 159-0375
Scraper 217-4826
Scraper 217-4843
Scraper 9W4505MT
Scraper 9W4399MT
Scraper 4T0668MT
Scraper 9W4394MT
Scraper 9W4509MT
Scraper 236-7178MT
Scraper 236-7179MT
Scraper 7J1551MT
Scraper 7J0226MT
Scraper 7J2977MT
Scraper 7J2981MT

Besides CAT Scraper Backhoe Blades/Cutting Edges/End Bits, HCEPARTS also provide tooth/tooth tip/tooth point, tooth pin, tooth adapter/tooth holder, wear caps, lip shrouds, heel shrouds, kwiklok liners for for CAT, Komatsu, Hitachi, Volvo, Liebherr, Terex/O&K, SANY, Zoomlion, TZ, P&H excavators, loaders, bulldozer & motor grader rippers and electric shovels.

Metrics
error: HCEPARTS Content is protected !!