9V4370, 9V-4370 CAT 990 II LOADER BASE BLADE, Wheel Loader Replacement Centre Blades, Bucket Center Base Edge, Caterpillar Style Track Loader Replacement Cutting Edge, Bolt on Bucket Single Beveled Central Base Edges China Factory Supplier Expoter 9V4370, 9V-4370 CAT 990 II LOADER BASE BLADE Feature: CAT Part No.: 9V4370 , 9V-4370 Type: Base Edge […]
1U3202WTL Twin Tiger Tooth, CAT Style Tiger Teeth, Backhoe Bucket Tiger Teeth with Pins & Retainers, J200 J Series General Duty Tip, J200 Twin Tiger Tip Cat 1U3202WTL, Bucket Teeth China Supplier
1U3202WTL Twin Tiger Tooth w/ Pins & Retainers Feature:
Part No.: 1U3202WTL (1010705)
Replacement Brand: Caterpillar
Material ductile iron, gray iron, carbon steel, low alloy steel
Surface hardness:470-540MM HRC
Casting Bucket Teeth
Material 1# Hardness :48-52HRC Impact Value :>15J
Material 2# Hardness :48-52HRC Impact Value :>20J
OEM are acceptable
1U3202 Twin Tip Tiger Tooth
Caterpillar style J200 series twin tiger bucket tooth; takes a 9W7112 pin and an 8E6209 sleeved retainer;
Caterpillar J200 Style are the most common teeth in Australia for Caterpillar mini excavators from 3 to 6 tonne. They are fitted with a steel pin and a round spring steel retaining ring punched through the tooth horizontally. These will most likely be the teeth fitted If you have a compact loader or mini excavator from 3 to 6 tonne manufactured by Caterpillar.
Blade or Twin Tiger?
Blade teeth are great for general purpose work and long life, the large wear area will last longer than twin tip tiger teeth. Twin tip tiger teeth will penetrate the ground much easier than blade teeth due to sharper points on the teeth, however they will wear faster than blade teeth due to the smaller wear area than blade teeth. The general rule of thumb is to use blades for normal work and tigers when the ground is too hard and the machine is struggling to dig.
HCEPARTS Teeth are manufactured to the highest quality standards available. All our teeth are manufactured using the Lost Wax Investment Casting process rather than the old fashioned sand casting process. This ensures higher tolerances on the teeth and adapters during casting. All teeth and adapters are made from high quality alloy steel to achieve an impact strength of greater than or equal to 20J. They are also hardened from 47-52 HRC for extremely long wear life. Backhoe Bucket Tiger Teeth with Pins & Retainers
Width 41 mm
Height 46 mm
Depth 65 mm
Ø 15 mm
Shipping Weight 1.3000kg
BACKHOE WORK TOOL-WT
TRACK TYPE TRACTORS
MULTI TERRAIN LOADERS
1.Over 20 years of precision casting experiences.
2.We has rich experience in production and management team.
3.Process: Lost wax casting process and sand casting process.
We manufacture Bucket tooth and Adapters suiting for all famous brands.