135-6738, 1356738 Caterpillar Machinery Cutting Edge 1/2” X 8” X 4´ (9# 3/4”) Bolt, Motorgrader Bolt On Blade, Low Price Dbc Grader Blades, CATERPILLAR Curved Grader Blade, CAT Genuine Parts Motorgrader Curved Double Bevel Blade, G.E.T Parts Boron Steel Center Blades with 6 holes, Through Hardened Heat Treated Cutting Edges for Motor Grader China Supplier
135-6738, 1356738 Caterpillar Machinery Cutting Edge Specifications:
Part No. 135-6738, 1356738
OEM
135-6738
Manufacturer
Caterpillar
Machine
Grader
A 203mm Material HB500
B 13mm Diameter 3/4″
C 1217mm Tooth
D Holes 9
E Class
F
G
R
Weight 20,4Kg
Cat motor grader cutting edges provide the best balance of abrasion and impact resistance. Both Cat cutting edges and end bits are designed as a balanced system to move more material over a longer period with less downtime. This is accomplished by providing great strength for superior breakage resistance, and by offering maximum wear protection from both bottom and face wear on the cutting edge.
Caterpillar SIS machinery equipment:
Caterpillar SIS
14M Series 3 Motor Grader N9S00001-UP (MACHINE) POWERED BY C13 Engine » 135-6738 EDGE-CUTTING
14M Series 3 Motor Grader E9S00001-UP (MACHINE) POWERED BY C13 Engine » 135-6738 EDGE-CUTTING
140M Motor Grader B9D00001-UP (MACHINE) » 135-6738 EDGE-CUTTING
120M Motor Grader – All Wheel Drive D9W00001-UP (MACHINE) POWERED BY C6.6 Engine » 135-6738 EDGE-CUTTING
140M Motor Grader – All Wheel Drive D9G00001-UP (MACHINE) POWERED BY C9 Engine » 135-6738 EDGE-CUTTING
12M Series 2 Motor Grader R9S00001-UP (MACHINE) POWERED BY C9.3 Engine » 135-6738 EDGE-CUTTING
14M Motor Grader R9J00001-UP (MACHINE) POWERED BY C11 Engine » 135-6738 EDGE-CUTTING
16M Motor Grader R9H00001-UP (MACHINE) POWERED BY C13 Engine » 135-6738 EDGE-CUTTING
1341778 EDGE-CUTTING
Caterpillar
1341774 EDGE-CUTTING
Caterpillar 132-1087, 1321087 Curved Cutting Edge for CAT Grader
1341773 EDGE-CUTTING
Caterpillar
1339291 EDGE
Caterpillar
1339288 EDGE AS 132-1088, 1321088 Curve Grader Cutting Edge
Caterpillar
1339287 EDGE
Caterpillar
1349273 EDGE AS
Caterpillar
1349270 EDGE AS
Caterpillar
1348333 EDGE AS
Caterpillar
1344296 EDGE-BASE
Caterpillar
1342181 EDGE AS.
Caterpillar
1341797 EDGE AS.
Caterpillar
View From Back Side Of Hydraulic Oil Tank6. Disconnect two hose assemblies (5) from the back side of the hydraulic oil tank. Put plugs in the hose assemblies to prevent oil loss and to keep dirt out of the hydraulic system. 7. Remove bolt (7) to disconnect clamp (6) from the tube assembly at the back side of the main control valve. 8. Remove four bolts (8), the washers and support assembly (9). 9. Remove four socket head bolts (10) from block (11) on the side of the hydraulic oil tank.10. Remove four bolts (12) and the washers. Move hydraulic oil filter (13) away from the hydraulic oil tank. 11. Put identification marks on the two wires connected to the sending unit on the side of the hydraulic oil tank. Disconnect two wires (14) from the sending unit. 12. Remove four socket head bolts (15) to disconnect pipe assembly (16) from the bottom of the main hydraulic pump. Put a plug in the pipe assembly to prevent oil loss and to keep dirt out of the hydraulic system. 13. Remove clamp (17). Slide hose assembly (18) off of the hydraulic oil tank.
View From Under Hydraulic Oil Tank14. Remove four bolts (19) and the spacers that hold the hydraulic oil tank to the frame of the machine. 15. Fasten Tool (A) and a hoist to the top of the hydraulic oil tank as shown. Carefully remove hydraulic oil tank (20) from the machine. The empty weight of the hydraulic oil tank is 125 kg (275 lb). There are shims used between the hydraulic oil