50Mn Steel Bottom Track Rollers 6Y1057 / 8E5034, Track roller CATERPILLAR 325 D DBH 1-UP 117-5046 163-4147 6Y1057 UF194C0E CJ5525 CR5525 A01250C0M00, Friction Welding Bottom Track Roller, Caterpillar Dozer Excavator Track Rollers, Dozer Undercarriage Parts, flanged track roller, bulldozer track rollers, Replacement Cat style Roller Carrier, Undercarriage Parts, OEM Earthmoving Spare Parts Bottom Roller Track […]
134-1779, 1341779 Caterpillar Style Cutting Edge 1/2” X 8” X 5´ 11# 3/4″ Bolt, Motorgrader Bolt On Blade, Low Price Dbc Grader Blades, CATERPILLAR Curved Grader Blade, CAT Genuine Parts Motorgrader Curved Double Bevel Blade, G.E.T Parts Boron Steel Center Blades with 6 holes, Through Hardened Heat Treated Cutting Edges for Motor Grader China Supplier
134-1779, 1341779 Caterpillar Style Cutting Edge Specifications:
Part No. 134-1779, 1341779
Weight: 66 pounds 29 kg.
BEVEL ANGLE 33.5
BOLT HOLE SIZE 21 mm
HOLE SPACING 152.4 mm
LENGTH 1521.6 mm
NUMBER OF HOLES 11
THICKNESS 12.7 mm
WIDTH 203.2 mm
Cat motor grader cutting edges provide the best balance of abrasion and impact resistance. Both Cat cutting edges and end bits are designed as a balanced system to move more material over a longer period with less downtime. This is accomplished by providing great strength for superior breakage resistance, and by offering maximum wear protection from both bottom and face wear on the cutting edge.
24 Motor Grader N9Z00001-UP (MACHINE) POWERED BY C27 Engine » 134-1773 EDGE-CUTTING
24 Motor Grader E9Z00001-UP (MACHINE) POWERED BY C27 Engine » 134-1773 EDGE-CUTTING
12M Series 2 Motor Grader R9S00001-UP (MACHINE) POWERED BY C9.3 Engine » 134-1773 EDGE-CUTTING
16M Motor Grader R9H00001-UP (MACHINE) POWERED BY C13 Engine » 134-1773 EDGE-CUTTING
24M Motor Grader B9300001-UP (MACHINE) POWERED BY C18 Engine » 134-1773 EDGE-CUTTING
Caterpillar 132-1087, 1321087 Curved Cutting Edge for CAT Grader
1339288 EDGE AS
1349273 EDGE AS
1349270 EDGE AS
1348333 EDGE AS
1342181 EDGE AS.
1341797 EDGE AS.
View From Back Side Of Hydraulic Oil Tank6. Disconnect two hose assemblies (5) from the back side of the hydraulic oil tank. Put plugs in the hose assemblies to prevent oil loss and to keep dirt out of the hydraulic system. 7. Remove bolt (7) to disconnect clamp (6) from the tube assembly at the back side of the main control valve. 8. Remove four bolts (8), the washers and support assembly (9). 9. Remove four socket head bolts (10) from block (11) on the side of the hydraulic oil tank.10. Remove four bolts (12) and the washers. Move hydraulic oil filter (13) away from the hydraulic oil tank. 11. Put identification marks on the two wires connected to the sending unit on the side of the hydraulic oil tank. Disconnect two wires (14) from the sending unit. 12. Remove four socket head bolts (15) to disconnect pipe assembly (16) from the bottom of the main hydraulic pump. Put a plug in the pipe assembly to prevent oil loss and to keep dirt out of the hydraulic system. 13. Remove clamp (17). Slide hose assembly (18) off of the hydraulic oil tank.
View From Under Hydraulic Oil Tank14. Remove four bolts (19) and the spacers that hold the hydraulic oil tank to the frame of the machine. 15. Fasten Tool (A) and a hoist to the top of the hydraulic oil tank as shown. Carefully remove hydraulic oil tank (20) from the machine. The empty weight of the hydraulic oil tank is 125 kg (275 lb). There are shims used between the hydraulic oil