134-1773, 1341773 Caterpillar Grader Cutting Edge

134-1773, 1341773 Caterpillar Grader Cutting Edge 9# 3/4″ Bolt, Motorgrader Bolt On Blade, Low Price Dbc Grader Blades, CATERPILLAR Curved Grader Blade, CAT Genuine Parts Motorgrader Curved Double Bevel Blade, G.E.T Parts Boron Steel Center Blades with 6 holes, Through Hardened Heat Treated Cutting Edges for Motor Grader China Supplier

134-1773, 1341773 Caterpillar Grader Cutting Edge  Specifications:
Part No. 134-1773, 1341773
Weight: 67 pounds 30 kg.
Information:
BEVEL ANGLE 33
BOLT HOLE SIZE 21 mm
HOLE SPACING 152.4 mm
LENGTH 1216.8 mm
NUMBER OF HOLES 9
THICKNESS 15.9 mm
WIDTH 203.2 mm

Cat motor grader cutting edges provide the best balance of abrasion and impact resistance. Both Cat cutting edges and end bits are designed as a balanced system to move more material over a longer period with less downtime. This is accomplished by providing great strength for superior breakage resistance, and by offering maximum wear protection from both bottom and face wear on the cutting edge.

Caterpillar SIS
24 Motor Grader N9Z00001-UP (MACHINE) POWERED BY C27 Engine » 134-1773 EDGE-CUTTING
24 Motor Grader E9Z00001-UP (MACHINE) POWERED BY C27 Engine » 134-1773 EDGE-CUTTING
12M Series 2 Motor Grader R9S00001-UP (MACHINE) POWERED BY C9.3 Engine » 134-1773 EDGE-CUTTING
16M Motor Grader R9H00001-UP (MACHINE) POWERED BY C13 Engine » 134-1773 EDGE-CUTTING
24M Motor Grader B9300001-UP (MACHINE) POWERED BY C18 Engine » 134-1773 EDGE-CUTTING

1093120 EDGE GP
Caterpillar

1093119 EDGE-CUTTING
109-3150, 1093150 Caterpillar Motorgrader Edge Cutting

1093111 EDGE GP
Caterpillar

1093110 EDGE GP  109-3124, 1093124 Caterpillar BYG CARBON Steel Grader Blade
Caterpillar

1092699 EDGE-CUTTING
Caterpillar

1092698 EDGE-CUTTING
Caterpillar

1098485 EDGE AS
109-3137, 1093137 Caterpillar Motorgrader Blade Edge

1093548 EDGE
Caterpillar 9W6252, 9W-6252 Caterpillar Bolt On Cutting Edges

1093150 EDGE CUTTING
Caterpillar

1093147 EDGE-CUTTING
Caterpillar  9W1835, 9W-1835 Caterpillar Tractor Cutting Edges

1093137 EDGE CUTTING
Caterpillar 109-3124

1093126 EDGE GP-   Caterpillar Boron Steel Grader Blade 9W6252
Caterpillar 109-3124

View From Back Side Of Hydraulic Oil Tank6. Disconnect two hose assemblies (5) from the back side of the hydraulic oil tank. Put plugs in the hose assemblies to prevent oil loss and to keep dirt out of the hydraulic system. 7. Remove bolt (7) to disconnect clamp (6) from the tube assembly at the back side of the main control valve. 8. Remove four bolts (8), the washers and support assembly (9). 9. Remove four socket head bolts (10) from block (11) on the side of the hydraulic oil tank.10. Remove four bolts (12) and the washers. Move hydraulic oil filter (13) away from the hydraulic oil tank. 11. Put identification marks on the two wires connected to the sending unit on the side of the hydraulic oil tank. Disconnect two wires (14) from the sending unit. 12. Remove four socket head bolts (15) to disconnect pipe assembly (16) from the bottom of the main hydraulic pump. Put a plug in the pipe assembly to prevent oil loss and to keep dirt out of the hydraulic system. 13. Remove clamp (17). Slide hose assembly (18) off of the hydraulic oil tank.
View From Under Hydraulic Oil Tank14. Remove four bolts (19) and the spacers that hold the hydraulic oil tank to the frame of the machine. 15. Fasten Tool (A) and a hoist to the top of the hydraulic oil tank as shown. Carefully remove hydraulic oil tank (20) from the machine. The empty weight of the hydraulic oil tank is 125 kg (275 lb). There are shims used between the hydraulic oil