109-3137, 1093137 Caterpillar Motorgrader Blade Edge

109-3137, 1093137 Caterpillar Motorgrader Blade Edge 5# 5/8″ Bolt, Motorgrader Bolt On Blade, Low Price Dbc Grader Blades, CATERPILLAR Curved Grader Blade, CAT Genuine Parts Motorgrader Curved Double Bevel Blade, G.E.T Parts Boron Steel Center Blades with 6 holes, Through Hardened Heat Treated Cutting Edges for Motor Grader China Supplier

109-3137, 1093137 Caterpillar Motorgrader Blade Edge Specifications:
Part No. 109-3137, 1093137
Weight: 30 pounds 14 kg.
Information:
BEVEL ANGLE 33.5
BOLT HOLE SIZE 18 mm
HOLE SPACING 152.4 mm
LENGTH 607.2 mm
NUMBER OF HOLES 5
THICKNESS 15.9 mm
WIDTH 203.2 mm

Compatible equipment models:
MOTOR GRADER 120G 120H 120H ES 120H NA 12G 12H 12H ES 12H NA 130G 135H 135H NA 140B 140G 140H 140H ES 140H NA 143H 160M Caterpillar

Cat motor grader cutting edges provide the best balance of abrasion and impact resistance. Both Cat cutting edges and end bits are designed as a balanced system to move more material over a longer period with less downtime. This is accomplished by providing great strength for superior breakage resistance, and by offering maximum wear protection from both bottom and face wear on the cutting edge.

Manufactured from steel with properties that maintain hardness for long wear life, our durable cutting edges make it possible for your machines to deliver the performance you demand. Protect your investment by always choosing genuine Cat Ground Engaging Tools.

Attributes
• Impact and abrasion resistance
• High productivity in any application

1093120 EDGE GP
Caterpillar

1093119 EDGE-CUTTING
Caterpillar

1093111 EDGE GP
Caterpillar

1093110 EDGE GP
Caterpillar

1092699 EDGE-CUTTING
Caterpillar

1092698 EDGE-CUTTING
Caterpillar

1098485 EDGE AS
Caterpillar

1093548 EDGE
Caterpillar 9W6252, 9W-6252 Caterpillar Bolt On Cutting Edges

1093150 EDGE CUTTING
Caterpillar

1093147 EDGE-CUTTING
Caterpillar  9W1835, 9W-1835 Caterpillar Tractor Cutting Edges

1093137 EDGE CUTTING
Caterpillar 109-3124

1093126 EDGE GP-
Caterpillar 109-3124

View From Back Side Of Hydraulic Oil Tank6. Disconnect two hose assemblies (5) from the back side of the hydraulic oil tank. Put plugs in the hose assemblies to prevent oil loss and to keep dirt out of the hydraulic system. 7. Remove bolt (7) to disconnect clamp (6) from the tube assembly at the back side of the main control valve. 8. Remove four bolts (8), the washers and support assembly (9). 9. Remove four socket head bolts (10) from block (11) on the side of the hydraulic oil tank.10. Remove four bolts (12) and the washers. Move hydraulic oil filter (13) away from the hydraulic oil tank. 11. Put identification marks on the two wires connected to the sending unit on the side of the hydraulic oil tank. Disconnect two wires (14) from the sending unit. 12. Remove four socket head bolts (15) to disconnect pipe assembly (16) from the bottom of the main hydraulic pump. Put a plug in the pipe assembly to prevent oil loss and to keep dirt out of the hydraulic system. 13. Remove clamp (17). Slide hose assembly (18) off of the hydraulic oil tank.
View From Under Hydraulic Oil Tank14. Remove four bolts (19) and the spacers that hold the hydraulic oil tank to the frame of the machine. 15. Fasten Tool (A) and a hoist to the top of the hydraulic oil tank as shown. Carefully remove hydraulic oil tank (20) from the machine. The empty weight of the hydraulic oil tank is 125 kg (275 lb). There are shims used between the hydraulic oil