9V4370, 9V-4370 CAT 990 II LOADER BASE BLADE, Wheel Loader Replacement Centre Blades, Bucket Center Base Edge, Caterpillar Style Track Loader Replacement Cutting Edge, Bolt on Bucket Single Beveled Central Base Edges China Factory Supplier Expoter 9V4370, 9V-4370 CAT 990 II LOADER BASE BLADE Feature: CAT Part No.: 9V4370 , 9V-4370 Type: Base Edge […]
102-2184 Heavy Duty Wheel Type Loader Cutting Edge Center, Heavy Duty Bucket Cutting Edge, OEM Replacement CAT style bolt on center cutting edge for wheel-type loader, Heat Treated Blade/Cutting Edges/End Bits China Manufacturer
102-2184 Heavy Duty Wheel Type Loader Cutting Edge Center Parameter:
Part No. 1022184 / 102-2184
Weight 355.00 lb / 161.03 kg
988K 988F II 988F
Caterpillar style bolt on end cutting edge for a Caterpillar 988 Front End Loader. This is a double beveled reversible bucket end cutting edge that is 1.5″ thick, 19″ wide and 49.25″ in length. It takes 6 of a 1 1/4″ x 3 3/4″ (125X375) plow bolt and 6 of a 1 1/4″ (125 HEscoNUT) hex nut. The bolt hole spacing is 3.346″ from center to center of the first 2 bolt holes, and 11.08″ when measured from the edge of the bucket cutting edge to the center of the first hole.
Cat bolt-on cutting edges have moderate impact resistance to allow them to perform across a variety of applications boosting your machines versatility. They are designed to reduce the time required to replace your cutting edges, increase bucket capacity, and reduce downtime by maintaining a long wear.
Made from high-carbon manganese steel alloy, producing a blade that is both tough and resistant to wear to minimize breakage. With a hardness of Rc 28 ± 5, blade performance is optimized in medium to aggressive environments. Warranted against breakage due to a defect in material and workmanship for the life of the cutting edge. 980 Caterpillar Front End Loader Blades Heavy Duty Bucket Cutting Edge 100-4044
Double Beveled Reversible Cutting Edges
Heat treated to RC 28
Hardened edge steel for superior cutting edge life
Width up to 8″ wide available
Thickness available up to 3/4″
Counter Sunk Bolt Hole
WAYS TO FIND YOUR EDGE:
First look at the options shown below. These are just a few of the most common edges.
If you don’t find the replacement below that your looking for don’t worry. We most likely have it available.
You can also contact our support team and we will be happy to assist you. You will need to provide some additional information to ensure an accurate price and match. Please have this information ready before calling. Caterpillar Double Beveled Reversible Bucket Cutting Edges Center 101-9350
-Total Length of edge needed
-Total Width of edge needed
-Edge to Center of 1st Hole
-Distance between Holes on Center (Center to Center)
-Size of Hole