Wheel Loaders Maintenance: 4 Effective Daily Routines
Wheel loaders maintenance is important to keep a wheel loader in peak operating condition. Daily maintenance can be time-consuming especially when business is booming and you are on a really tight schedule.
So, it can be quite tempting to skip daily maintenance just to gain a few extra minutes and stay on schedule. However, if you often skip daily maintenance, it will eventually take a toll on the performance of wheel loaders which will ultimately impact productivity, uptime, and fuel efficiency.
Therefore, in the long run, daily wheel loaders maintenance routines can be extremely beneficial for your wheel loaders.
Effective Daily Routines for Wheel Loaders Maintenance
Not only does daily wheel loaders maintenance help extend machine life and increase uptime, it also helps increase productivity.
So, to maintain your wheel loaders, follow these effective daily routines:
Clean drivelines seals and axles
Loading and unloading material all day can cause excessive wear on the wheel loader’s attachments. They are susceptible to wear and tear after prolonged use.
To ensure these attachments stay in peak operating condition, operators need to perform daily visual inspections of the attachments.
For example, most wheel loaders have buckets and the teeth are one of the first things that can easily be damaged. Therefore, make sure you check for loose, missing, or cracked teeth.
Another common wheel loader attachment is the pallet fork. For a pallet fork, you want to check its hoses, tilt and lift cylinders, wear plates, and attachment pins for any sign of damage.
Inspect tires for wheel loaders maintenance
An experienced operator should be able to detect damages and leaks on the tire. Plus, the operator should also be familiar with proper tire inflation.
Undetected leaks and improper inflation can cause the tire to wear prematurely and unexpected downtime. This may lead to tire failure over time.
To avoid these issues, operators need to inspect tires daily for wear and tear. In addition, proper inflation according to the recommended psi will also help extend the tire’s life.
The driving and parking brakes of wheel loaders should be maintained and inspected daily. It is one of the most critical routines for wheel loaders maintenance at all times.
Most worksites tend to be congested with other construction equipment and vehicles. Plus, aside from the normal loading procedures, there can also be a lot of quick stops.
For these reasons, operators must be able to halt their wheel loader and hold it with the parking brake whenever needed.
Clean driveline seals and axles
Wheel loaders are also used to work in wet conditions such as those found in construction, agricultural, and concrete plant environments.
This can lead to material build-up along with the driveline seals and axles that may cover a potential problem in need of repair.
Keeping those areas clean daily will allow for a better inspection to identify leaks and prevent unwanted downtime.
Properly Trained Operator for Proper Wheel Loaders Maintenance
No amount of daily routine checks will be effective if the operators are not educated on the maintenance methods and procedures.
If you are going to perform your wheel loader’s maintenance yourself, refer to the recommendations of your manufacturer’s maintenance manual for intervals and checklists.
Ideally, you will also want to obtain maintenance training and assistance from your heavy machinery manufacturer on the proper techniques.
Wheel Loader Operator Tips: Load Trucks with Better Efficiency
232-70-52191 China Manufacturer Komatsu Machine End Bit
9D4880 Construction Parts End Bit RH
9D4881 9D-4881 Bolt On LH Grader End Bit
Hidromek 102B 102S Bucket Teeth 810/10605, 81010605