Single bucket excavator use a single bucket digging soil or self-ore mining machinery. It is made of the work unit, turntable and walking equipment. After the bucket is digging full, it turn to dump, and conduct periodic operations. The single bucker excavator is widely used in housing construction, road construction, hydropower construction, agricultural transformation, military engineering, open pit mining and open storage yard.
Single Bucket Excavator
The development of the single bucket excavator tends to large, miniaturization and multi-functional and specialization. Large mining excavator will continue to increase the bucket capacity to decrease excavation unit. Combining the construct needing of city and countryside, we should develop the portable microcomputer. In order to solve the special construction, we should develop the special excavator of low pressure, low noise, underwater special, amphibious.
Shovel excavators are mainly used for digging the material, which is above the surface of machine. Mechanical shovel excavator using push pressure and the lifting force to dredged materials. When digging, keep the boom angle unchanged. Firstly, the bucket down to mining the starting position. Then the overhanging bucket rod will press the bucket tooth into the material pile. At the same time, promote the bucket and cut material. After the bucket is full, the turntable rotary, the bucket was brought to the point of discharge and open the bucket bottom to cut materials. After complish unloading materials, the turntable rotary to the digging position and start next cycle operation.
Single bucket excavator – Backhoe excavators are mainly used for digging the material, which is under the surface of machine. Mechanical backhoe excavator use the gravity and mining of the equipment to dig materials. The first step is rotating the bucket rod to make the arm and bucket forward. Secondly, the equipment down the starting position by the gravity and make the bucket teeth cut materials. Then rotate the arm and bucket to cut down the materials. After the bucker is full, lifting the arm to a certain height, the turntable rotary, the bucket was brought to the point of discharge and the rotating bucket start unloading. After complish unloading materials, the turntable rotary to the digging position and start next cycle operation.
3/4 X 8 X 10 Excavator Flat Single Bevel Cutting Edge
3/4 X 8 X 10 Excavator Flat Single Bevel Cutting Edge, Heavy Equipment Excavator Weld On Cutting Edge, Replacement Flat Single Bevel Excavator Bucket Cutting Edge, Caterpillar Style Blades China Supplier 3/4 X 8 X 10 Excavator Flat Single Bevel Cutting Edge Feature: Type: SBF or FSB Size: 3/4 inch X 8 inch X 10 inch Material: 16Mn: HB350±20, 30MnB:HB460±20 Compatible […]
3/4 x 6 x 14 inch Excavator Weld On Cutting Edge
3/4 x 6 x 14 inch Excavator Weld On Cutting Edge, Replacement Flat Single Bevel Cutting Edge, China Excavator Bucket Cutting Edge, Caterpillar Style Flat Single Bevel Blades Manufacturer 3/4 x 6 x 14 inch Excavator Weld On Cutting Edge Feature: Type: SBF or FSB Size: 3/4 inch X 6 inch X 14 inch Material: 16Mn: HB350±20, 30MnB:HB460±20 Compatible Machine […]
3/4 x 6 x 10 Replacement Weld On Cutting Edge
3/4 x 6 x 10 inch Replacement Weld On Cutting Edge, Flat Single Bevel Excavator Cutting Edge, Weld in Base Edges, Excavator Bucket Cutting Edge, Caterpillar Style Flat Blades Manufacturer 3/4 x 6 x 10 Replacement Weld On Cutting Edge Feature: Type: SBF Size: 3/4 inch X 6 inch X 10 inch Material: 16Mn: HB350±20, 30MnB:HB460±20 Compatible Machine Models: […]
2 X 16 X 8 inch Weld-on Single Bevel Flat Excavator Cutting Edge
2 X 16 X 8 inch Weld-on Single Bevel Flat Excavator Cutting Edge, Weld On Replacement Excavator Base Edges, Excavator Bucket Cutting Edge, Caterpillar Style FSB Blades China Manufacturer 2 X 16 X 8 inch Weld-on Single Bevel Flat Excavator Cutting Edge Feature: Type: SBF or FSB Size: 2 inch X 16 inch X 8 inch Material: 16Mn: HB350±20, 30MnB:HB460±20 Compatible Machine […]
1U0762 Center Bolt-On Cutting Edge
1U0762 Center Bolt-On Cutting Edge, Double Beveled Reversible Bucket Center Cutting Edge, Track and Wheel Loader Bolt-On Reversible Cutting Edges, Caterpillar Track Excavator Replacement Blade 1U0762 Center Bolt-On Cutting Edge Feature: Part No.: 1U0762 Type: DBF Size: 1.375” thick * 16” wide * 55.25” length Material: High carbon steel or Boron steel Compatible Machine Models: CAT […]
135-9397 Edge-Cutting
135-9397 Edge-Cutting, Multi Terrain & Skid Steer Loader Bolt-On Cutting Edge, Mini-Excavator Replacement Center Edge, 1359397 Caterpillar Wheel Loader Cutting Edge, 904B Grapple Buckets Cutting Edge China Factory 135-9397 Edge-Cutting Feature: CAT Part No.: 135-9397 Type: DBF Size: 0.625” thick * 6.5” wide * 74.625” length Material: High carbon steel or Boron steel Compatible Machine […]