Motor Grader Safety Tips for Work Sites
On a construction work site, safety should be of utmost importance. Motor graders, like any heavy equipment, carry inherent risk during operation. Improper use can quickly lead to injury or even death for the operator or construction workers in the vicinity.
Following our motor grader safety tips will help protect both workers and operators on the work site. As an added bonus, it will also prevent damage to your motor grader.
Operator safety generally applies to measures taken in the cab of the grader. There are many ways that the operator can reduce any risk to themselves while the motor grader is in operation.
Make sure your hardhat and seatbelt are on before you start the machine
Once started, check for any warning lights and listen for any unusual sounds
Make sure your view out the windows is not obstructed
Clear the cab floor of any debris
Never allow anyone in the cab with you while the machine is in operation
While the motor grader is running, moving and grading, these tips will help prevent accidents that could endanger the life of the operator and other workers.
Avoid turning the grader on a slope
Reduce speed on rough terrain
Watch for any dangers overhead
Maintain a slow and steady speed at all times
Keep the grader in gear when going down a hill
It’s often necessary for construction workers on the ground to be near the grader while it’s in operation. The following safety procedures need to be observed to minimise any risk to them.
There should be a clear communication system between workers and the operator
Use flashing safety lights when the machine is in operation
Mark the ends of the moldboard with a flag when grading
The operator must always double check the way is clear before reversing the grader
No one should ever work underneath the blade when it is raised
Machine safety procedures will help prevent damage to the motor grader as well as undue wear-and-tear. Some of these measures will also help ensure operator safety.
Always park the grader on a level surface and engage the handbrake
Lock the blade when the machine is parked
Ground the blade when the machine is left unattended
Always lock the cab when the machine is parked and unattended
Ensure the grader is well maintained and any repairs are made by a professional
Dozer End Bits
Dozer End Bits, Ground Engaging Tools HC Dozer End Bits, Komatsu bulldozer end bit, Heavy Machinery Spare Parts Caterpillar End Bit, China G.E.T Parts Manufacturer Dozer End Bits Dozer End Bits Features: Material: Boron steel or Manganese steel Colors: Black, Red, Yellow or Customized Thickness: From 16mm to 60mm, width is not limited,suitable for all kinds of […]
Bulldozer End Bits
Bulldozer End Bits, Bulldozer Cutting Edges and End Bits, Bulldozer End Bit Spare Parts,Komatsu Bulldozer End Bit, Caterpillaer Dozer Hot Cupped End Bit, Earthmover End Bit Bulldozer End Bits Features: Material: Boron steel or Manganese steel Colors: Black, Red, Yellow or Customized Thickness: From 16mm to 60mm, width is not limited,suitable for all kinds of machine models,domestic […]
Dozer Cutting Edges
Dozer Cutting Edges, Bulldozer Cutting Edges and end bits, Caterpillar replacement parts for bulldozer Double bevel cutting edge Dozer Cutting Edges and end bits Features: Material: Boron steel or Manganese steel Colors: Black, Red, Yellow or Customized Thickness: From 16mm to 60mm, width is not limited,suitable for all kinds of machine models,domestic and foreign. Type: Single bevel, […]
Bulldozer Cutting Edge and End Bit
Bulldozer Cutting Edge and End Bit, Dozer Cutting Edge and End Bit, Caterpillar Construction Machinery Spare Parts Cutting Edge for Bull Dozer, Double Bevel Flat Blades Cutting Edge, Arrowhead Blades Bulldozer Cutting Edge and End Bit Feature: Material: Boron steel or Manganese steel Colors: Black or Yellow or Red or Customized Thickness: From 16mm to 60mm, width is not limited,suitable […]