How to do the maintenance work of the Grader Spare Parts parked for a long time
The use of engineering equipment is carried out closely following the construction period. It is common for the equipment not to be used for ten and a half months after the construction period is suspended. Grader Spare Parts The same is true for motor graders after long-term maintenance. The lessor of the grader today mainly introduces how to maintain the grader that has not been used for a long time.
When the motor grader will be out of use for more than 30 days,Grader Spare Parts it must be ensured that its parts are not exposed. Clean the motor grader thoroughly to ensure that all corrosive residues are washed away. Open the drain valve at the bottom of the fuel tank and place about 1 liter of fuel in order to remove accumulated water.
Replace the air filter,Grader Spare Parts machine filter, and add fuel stabilizer and preservative to the fuel tank. Remove the battery and store it in a ventilated and dry place. The temperature should be between 0-21 degrees Celsius to ensure that the battery is fully charged.
Another advantage of maintaining the scarifiers is that this component of the machine speeds up your work. The wear and tear on the machine are also decreased when a scarifier in good condition is used.
Put these motor grader maintenance tips into action and experience the results for yourself. Remember to read the manufacturer’s guidelines to find out how to care for your specific machine.
122-9227 Cutting Edge Compactor
Bulldozer Cutting Edges HD 60MM D9 113-0321
112-2475 Bulldozer Spare Parts Cutting Edge Hot Cup
112-2474 Mining Equipment Spare Parts Bulldozer Cutting Edge
Toplok Lip Shrouds and Wing Shrouds