How to Choose the Right Material For Excavator Loader Bucket Blade?
The bucket is also called a bucket. It is divided into a backhoe bucket and a front bucket according to the working mode. Generally, the backhoe bucket is commonly used. The bucket blade is the main force component of the bucket of the excavator and loader. Easy to wear and wear parts, how to extend its service life?
The common material of the bucket is domestic high-quality alloy steel Q345b, which is the standard bucket material. Generally suitable for lighter operating environments such as general clay and loose soil excavation and loading of sand, soil and gravel.
There are also called reinforced buckets, which use high-strength wear-resistant steel to increase the service life of vulnerable parts, seat plates, side blades and other places. It is mostly used for heavy-duty operations such as loading hard soil mixed with softer gravel or gravel and gravel.
There is another type called rock bucket. The material of the bucket seat and side blades of this bucket is ultra-high-strength HARDOX wear-resistant steel imported from Sweden. These buckets are mostly used in mines and ore docks. Hard gravel, hard soil, sub-hard rock, weathered rock or hard rock, blasting ore loading and other heavy-duty operating environments need to face severe abrasion and impact. According to the type of rock and ore, select the bucket teeth dedicated to the rock, and add side guards on the side of the bucket, and add wear-resistant liners on the bottom. Select hardox400 or hardox450 to hardox500 wear-resistant steel plates according to the hardness requirements.
Therefore, the material selection of the bucket should be determined according to the working environment in which it is located. If the material is not selected properly, problems such as those in the picture will occur. Buckets wear quickly and even crack and collapse. In addition to selecting the appropriate material, in addition to cutting, beveling and welding, we must follow the requirements of the material used.
Among them, the welding bucket is also a relatively key manufacturing process. Poor welding quality will directly affect the use of the bucket, which will greatly reduce the structural strength of the bucket and reduce the life of the bucket! 4D9922, 4D-9922 Caterpillar style Grader Blade
Water ditch bucket: suitable for the excavation of ditch of various shapes. The ditch can be excavated at one time without trimming and the operation efficiency is high. Choose the Right Material For Excavator Loader Bucket Blade 9W6252, 9W-6252 Caterpillar Bolt On Cutting Edges CAT 9J3655 Curved Double Bevel Blades
Sieve fighting: suitable for the excavation of relatively loose materials . 9J3655, 9J-3655 China Curved Grader Blade Excavation and separation can be completed at one time. It is widely used in municipal, agricultural, forestry, water conservancy, earth-rock engineering. CAT Tractor Blade 9W2328, 9W-2328 6 Holes 5/8″ Bolts Caterpillar 9J3660, 9J-3660 Motor Tractor Cutting Edge
Grab: vertical grabbing, 4T3511 Motor Grader Curved Serrated Cutting Edge suitable for excavation of foundation pits, deep pits, and loading of loose materials such as coal, sand, concrete, gravel, etc., especially for one side of a trench or restricted space Excavation or loading. 9J3863, 9J-3863 Caterpillar Tractor Blades 7D4509 11 Holes Curved Carbon Steel Boron Steel Blade
3G1627, 3G-1627 Bolt On Cutting Blade fits Motorgrader Cleaning bucket and inclined bucket: It is suitable for trimming the slope and other planes, as well as large-capacity dredging and cleaning of rivers and ditches. Among them, the inclined bucket can change the inclination angle of the cleaning bucket through the oil cylinder, which greatly improves the work efficiency. Choose the Right Material For Excavator Loader Bucket Blade 3G2166, 3G-2166 CAT 3/4″ Holes 2FT Curved Heat Treated Grader Blade 8J7782, 8J-7782 CAT Style Motor Grader Edges