How to Avoid Bucket Teeth Damaging Due to Abrasive Wear
When an excavator is digging, the wear volume loss of the outermost bucket teeth at both sides is 30% higher than that of innermost one. After being operated for a period, the innermost and outermost bucket teeth are better to exchange their positions;
Operator should pay attention to digging angle when operating an excavator, it should be perpendicular to the object surface, preventing bucket teeth from breaking caused by excessive inclination;
Excavator arm should not swing in horizontal direction when there is a large resistance, otherwise it is easy to cause the breaking of bucket teeth and seat since the horizontal forces are too large;
The wear status of bucket tooth seat is also a critical issue that can affect the service life of excavator bucket teeth. It is better to replace the bucket tooth seat when its wear volume loss reaches 10%, because the large gap caused by the wear will change the force bearing point between tooth seat and bucket tooth, which may result the breaking of bucket teeth;
Operating method also plays a very important role in increasing the utilization rate of bucket teeth. The excavator operator should pay special attention to the coordination of the operation, avoiding damage caused by impacting the bucket to rocks.
Benefits of using bucket teeth
Bucket wear protection, can protect bucket edge against dust and stone impacting;
Can provide operator with better edge sharpness and penetration for increased bucket loading capacity;
Excellent impact absorption when digging rock bed or hard clayey soil;
Bucket Teeth Earthmoving Equipment
4T-2962, 4T2962 CENTRAL SCRAPER 40 BLADE 16MM
Cat 9J1110 / 4T3428 30mm Scraper Blade
5J6827 WHEEL TRACTOR SCRAPER CENTRAL BLADES
4T2947, 5J6855 CAT Style TRACTOR SCRAPER BLADE
4T2947, 4T-2947 CAT Style SCRAPER BLADE ONE PIECE
4T3429 / 4T-3429 Cat Scraper 633 Blade