Hensley G.E.T. KMAX System

“STRENGTH, HIGH PERFORMANCE, LASTING VALUE
Construction operations worldwide depend on the safe, cost effective
performance of Hensley G.E.T. systems. The KMAX System of ground engaging tools uses strength, durability, performance and productivity to the extreme.”

“We know what it takes for construction equipment to run efficiently and cost effectively.
Our engineers analyzed how these machines
operate, and designed a system with a wide range of safe, economical and hard-working solutions. Years of research and testing have helped us create one of the most produc- tive, cost effective and user friendly systems available.”
“A SYSTEM SO GOOD IT’S PATENTED
Hensley Engineering has created a unique G.E.T. System.
The KMAX System is patent protected and offers an impressive list of benefits:”

Hensley G.E.T. KMAX System

Hensley G.E.T. KMAX System

“• Better penetration
• Consistent hardness through the tooth
• High strength design
• Reusable fastener
• Less “throw away”, more usable steel
• Fast tooth change out
• Reversible tooth
• Mechanical adapter wearcap in larger sizes”
“DURABILITY
HARDNESS RIGHT TO THE CORE
Hensley KMAX System teeth are manufactured to a higher standard. All KMAX System teeth are heat treated to meet critical specifications for strength and
durability, not only on the surface but right to the core.”
“BETTER PENETRATION
REDUCES CYCLE TIMES
The KMAX System’s streamlined design and self- sharpening teeth contribute
to better penetration. This reduces cycle times, requires less hydraulic pressure, and improves fuel consumption and overall production.” Hensley heat treatment produces a 477-532 Brinell level of hardness throughout the tooth.

“PERFORMANCE
THE GREATER THE NOSE, THE LONGER LASTING THE SYSTEM
We’ve got the right shape for all your application needs. The KMAX
System has a unique nose design that combines strength and durability with a one-piece, hammerless pin for quick, safe installation and
maintenance. The KMAX System nose has a design that reduces
areas of stress concentration under load.”
“EASY INSTALLATION, QUICK CHANGE−OUT
Easy and quick installation and replacement is a key advantage of the KMAX System. It just takes minutes to change teeth. Simply unlock the fastener with a socket wrench, remove the worn
tooth, put on a new tooth and you’re ready to go back to work.”
STEP 1
STEP 2
“As shown, place tooth onto adapter,
always observing
proper safety procedures.” “Insert fastener, making sure
it is in the unlocked position.”
STEP 3
STEP 4
“To lock, use the correct size socket,
rotate the pin locking shaft 90° clockwise to finish
the installation.” “When removing the fastener, use the correct size socket to rotate the pin-locking shaft
90° counter-clockwise.”
“PRODUCTIVITY
HIGHER CONSUMPTION RATIO, 60% CONSUMABLE STEEL
Hensley KMAX System teeth are designed for maximum strength and consumption ratios without unnecessary bulk. KMAX teeth remain sharp and penetrate longer, so you can work longer.”
The Tooth Consumption Ratio for ground engaging tools indicates the percentage of available wear material on the whole tooth. The greater the ratio, the better the value because more of the tooth is used and less is thrown away.
“For example, a 25 lb. tooth with a 40% consumption ratio
yields 15 lbs. of scrap material when the tooth wears out. A 25 lb. tooth with a 60% consumption ratio would only scrap 10 lbs. of material.
Bottom line, the Hensley KMAX System gives you longer life, improved performance and less waste.” “The KMAX RC style tooth shown
here offers a consumption ratio of 60%.”

119-8604 Cat J600 Wheel Loader Bucket Adaptor

119-8604 Caterpillar Weld-On J600 Two Strap Adapter

6I8606 ADAPTER-LH Caterpillar 365B 375 992C 992D

6I8605 ADAPTER-RH Caterpillar BEVEL ANGLE 22.5

6I8604 6I-8604 J600 Center Adapter fit 70mm Base Edge

6I8604 Cat style Weld-On J600 Two Strap Adapter

222-7700 Caterpillar Style J700 Two-Strap Top Long Bucket Adapter

132-4704 Caterpillar Style J700 Middle Two-Strap Adapter

107-3556 1073556 J550 Two Strap Adapter Left Hand

3G9496 J550 990 992G Loader Bucket Side Adapter LH

6I6556 J550 Excavator Two Strap Weld-on Bucket Adapter Left