EXTEND THE LIFETIME OF YOUR Bucket Cutting Edges
Bolt on edges (500HB) drilled 1″ (both sides bevelled)
BOLT ON EDGES (500HB) DRILLED 1″ (BOTH SIDES BEVELLED)
Bolt on edges are used in combination with base edges. The bolt on edges are reversible, which means that you can unscrew it when one side is worn out, turn it, bolt it again and keep running until both sides are worn out.
Bolt on edges (500HB) drilled 3/4″
BOLT ON EDGES (500HB) DRILLED 3/4″
Bolt on edges are used in combination with base edges. The bolt on edges are reversible, which means that you can unscrew it when one side is worn out, turn it, bolt it again and keep running until both sides are worn out.
Bolt on edges (500HB) undrilled
BOLT ON EDGES (500HB) UNDRILLED
Bolt on edges are used in combination with base edges. The bolt on edges are reversible, which means that you can unscrew it when one side is worn out, turn it, bolt it again and keep running until both sides are worn out.
Cutting edges (400HB)
CUTTING EDGES (400HB)
Cutting Edges are used in the front of loader and excavator buckets. Standard sizes available in thicknesses from 12-60 mm, widths of 100-500 mm and in the most usable cut to length size.
Cutting edges (500HB)
CUTTING EDGES (500HB)
Cutting Edges are used in the front of loader and excavator buckets. Standard sizes available in thicknesses from 12-60 mm, widths of 100-500 mm and in the most usable cut to length size.
Grouser bars (500HB)
GROUSER BARS (500HB)
Grouser bars are used in the screening and crushing production as grid bars. They can also be used when repairing track shoes on crawler excavators. Grouser bars are available in height 24-75 mm and width of 16-45 mm in most suitable cut to length size.
Profiles (500HB)
PROFILES (500HB)
Profiled cutting edges are used for added protection of the base edge. They can either be bolted or welded on. The half arrow edges can also be used as side cutters. Half arrow edges are available in thickness from 11 to 40 mm and a width from 101 to 254 mm.
Wear bars (500HB)
WEAR BARS (500HB)
Wear bars are used in a number of applications. They are used on buckets to increase strength and life time of the bucket. The standard range is available in thicknesses from 10-30 mm, widths from 80-200 mm in most suitable cut to length size.
We’ve got experts on the ground across CHINA. Get in touch so we can visit and spec you an HCEPARTS Blade guaranteed to reduce your running costs and downtime.
4T2238, 4T-2238 Caterpillar Tractor Flat Cutting Edge
7T3496, 7T-3496 Caterpillar Double Bevel Cutting Edge Flat
7T3495, 7T-3495 Caterpillar Flat Grader Blades
7T3494, 7T-3494 Caterpillar Motorgrader Flat Blades
4Z8129, 4Z-8129 Double Bevel Flat Blade Cutting Edge