Bucket Tooth Profiles According to Machine Model: Excavators and Loaders

Bucket Tooth Profiles According to Machine Model: Excavators and Loaders

Depending on the machine model, the tooth profile must offer certain characteristics for good operating performance and efficiency. The tooth types best suited to excavators and loaders are as follows.

1. Profiles for excavators

EXCAVATOR

TIGER PROFILE

TEETH 1U3352TL2

This profile offers unparalleled penetration in frozen ground, rock, and very cohesive terrain. It stays sharp but the wearing material is limited and so the tooth has a relatively short life.

TWIN TIGER PROFILE

TEETH 1359357

A profile offering greater penetration and durability compared to the single point profile (TIGER). It is mainly used in rocky terrain.

PENETRATION PROFILE

TEETH 9J4359 2

Distinguished for excellent penetration, it remains sharp throughout its operating life. Average amount of wearing material present. Recommended for clayey soils or ground with inclusions and medium-compact terrain.

STANDARD PROFILE (LONG)

PROFILO STANDARD LONG

Generally a good choice for most basic applications and for relatively loose terrain. Average amount of wearing material present on the tooth.

SYMMETRICAL PROFILE

TEETH 1U3352SYL

Good penetration in most terrain conditions including medium-compact. The vertical ribs on both sides ensure that the tooth remains sharp throughout its working life. Average amount of wearing material present.

ROCK CHISEL PROFILE

TEETH 1U3352RC

The best choice for rock or hard ground. It remains sharp throughout its operating life. Substantial amount of wearing material.

FLARE PROFILE

TEETH 3G8250

Designed for mud and soft terrain. Offers less penetration but enables greater material containment. Substantial amount of wearing material.

HEAVY DUTY LONG PROFILE

TEETH 9N4352

Very similar to the standard tooth (LONG) but with increased wearing material and so a longer operating life.

2. Profiles for loaders

LOADER

HEAVY DUTY ROCK ABRASION PROFILE

TEETH 1U3352PT

Good penetration. Increased material on the lower part of the tooth to ensure extended wear during use. The central rib ensures correct wear profile for the tooth (without “balling”). Excellent for compact and highly abrasive terrain.

HEAVY DUTY ABRASION PROFILE

TEETH 9N4303 1

Lower penetration and increased material on the bottom and sides of the tooth ensures extended wear during use. Recommended for abrasive and highly abrasive terrain.

HEAVY DUTY LONG PROFILE

TEETH 9N4352

Very similar to the standard tooth (LONG) but with increased wearing material and so a longer operating life. Bucket Tooth Profiles

The patented profile for every machine model Bucket Tooth Profiles

The line is designed for applications in which high ground penetration, impact resistance, and extended operating life of teeth are essential. Our patented profile is suitable for both excavators and loaders. Adopting this single profile makes it possible to simultaneously reduce costs and improve performance. Its special characteristics include: Bucket Tooth Profiles According to Machine Model: Excavators and Loaders

High productivity with the innovative self sharpening profile ensuring excellent performance

Reinforced side pin structure

Increased material in the pin insertion area

High impact resistance

Carefully selected steel composition

Extended wear life

T167829 John Deere Front End Loader End Bit

John Deere Replacement End Bit T49155

T162841 John Deere Dozer Bucket End Cutting Edge

T79193 Replacement John Deere Bulldozer Replacement Center Blade

John Deere Dozer End Bit T187243

4T6511, 4T-6511, 8D0226 CATERPILLAR Motorgrader Flat Blade