How to extend the wear life of the bucket teeth Matching the correct excavator tooth to your machines can significantly reduce wear rates and increase ease of digging. This results in faster cycle time, less fuel consumption and reduced downtime. We can give professional suggestions of the correct bucket tooth for your application. Rotating your [...]
How to Weld Flush Mount Adaptors 1. Place the adaptor on the lip so that the corner adaptors are well placed on the corners. Make sure that they sit well on the level of the blade. 2. Preheat and start welding several points to maintain the adaptors in place. 3. It is convenient to start [...]
SKID STEER BUCKET EDGE OPTIONS BOLT-ON The most common and inexpensive bucket edge. Bolt-on edges protect and increase strength to the front end of the bucket. They prevent the bucket edge (lip) of the bucket from wearing. The bolt-on edge is replaceable, reversible, and beveled on both sides. It can be reversed before it wears [...]
FANGGS Bucket Tooth Position FANGGS teeth have a curved shape to extend the contour of the bucket which results in a continuous flow of material to achieve maximum bucket fill. Reversing Fanggs teeth so that the curve of the tooth is opposite that of the bucket is not recommended. FANGGS Bucket Tooth Position [...]
Bucket Tooth Basics Tooth Performance and Wear Life Maximum performance and wear life are the two most important characteristics for replacement teeth. Working with constant abrasive material places extreme demands on both design and strength. Design is directly related to performance while strength is directly related to wear life. Tooth Penetration Penetration is a key [...]
Dozer Cutting Blades have been designed for light, rough and finish grading applications in dirt and gravel. They range in thickness from 13mm up to 60mm and width from 152mm up to 480mm to suit your application. Dozer Centre Blades | CAT Dozer End Blades | CAT Dozer Centre Blades | Komatsu Dozer End Bits [...]
Standard & Customized Blades / Cutting Edges We provides standard & customized blades for excavators (backhoe, face shovel, electrical shovel), loaders, tractors, bulldozers, motor graders, and scrapers. Specifically speaking, the blades we supply are as follows but not limited to them. Excavator Blades / Cutting Edges / End Bits Weld-on blades Bolt-on blades Fabricated side [...]
Bucket Adapter Installation Various retention methods between the adapter and bucket as well as the tooth and adapter are available. Check the condition of the bucket and repair as necessary before installing an adapter. Bolt-On Adapters When installing a new adapter, be sure the cutting edge provides a firm mounting base. If the edge has [...]
TWIN RAM TILT BUCKET Elite Tilt Bucket The durable and field-proven design of the Elite Tilt Bucket means increased power, control and efficiency. Featuring unbelievable strength, capacity and shaping results the NEW design is the Elite standard in Tilt Buckets. The TWIN RAM TILT BUCKET is premium double ram tilt bucket. It is the best [...]
CUTTING EDGE RANGE A FULL RANGE OF BOLT-ON AND WELD-IN CUTTING EDGES ARE AVAILABLE FOR ALL MAKES AND MODELS OF EXCAVATORS, LOADERS, DOZERS, SCRAPERS, GRADERS, COMPACTORS AND OTHER EARTHMOVING MACHINES CUTTING EDGE PROFILES Single Bevel, Half Arrow and Double Bevel Cutting Edge profiles are available to suit all types of buckets and blades. CUTTING [...]
