Blog

BUCKET WHEEL EXCAVATOR MARKET ANALYSIS AND GLOBAL OUTLOOK 2022 TO 2028 – CAT, KOMATSU, DOOSAN, VOLVO, HYUNDAI, HITACHI

BUCKET WHEEL EXCAVATOR MARKET ANALYSIS AND GLOBAL OUTLOOK 2022 TO 2028 – CAT, KOMATSU, DOOSAN, VOLVO, HYUNDAI, HITACHI The Global Wheeled Excavators Market research report provides an in-depth study of current trends, recent expansions, conditions, market size, various drivers, constraints and key players along with their profile details.The Bucket Wheel Excavator Market research report provides [...]

What are the key points to be mastered for safely driving a motor grader

What are the key points to be mastered for safely driving a motor grader For any construction machinery driver,Grader Spare Parts strict compliance with safe operating procedures is the basic code. Take motor grader rental equipment as an example. What are the key points to be mastered for safely driving this type of equipment? During [...]

How to Maintain The Excavator

How to Maintain The Excavator Excavators are large-scale construction machinery,Excavator Parts and whether they can be used normally every day is related to whether the work can be performed normally. Therefore,Excavator Parts minor problems with parts should not be ignored. If the work is started normally in order to minimize the failure rate of excavator [...]

Reasons for High Water Temperature and Water Tank of Excavator

Reasons for High Water Temperature and Water Tank of Excavator First, check the diesel in the fuel tank of the small excavator. After opening the water tank cover,Excavator Parts it is found that the antifreeze has a distinct diesel smell, and the antifreeze turns from dark red to pink. This phenomenon proves that there is [...]

Undercarriage Parts Track Chain

Undercarriage Parts Track Chain HCE  track chains are manufactured by our specialty forging presses 1600T and 1000T. Through advanced forging process, steel billets are reshaped under extreme pressure and high temperature, thus optimizing grain flow of steel to enhance the mechanical properties. The forged track chain features excellent tensile strength, better wear resistance and longer [...]

Undercarriage Parts Pins and Bushes

Undercarriage Parts Pins and Bushes Material: 40Cr or 35MnB Heat treatment depth: 4-10mm Excavator and bulldozer track pin and bushes Undercarriage Parts Pins and Bushes There more of track pin and bushing parts for you to choose No. Model Name Dimension 1 PC60-6 Track Bush 24.5*41.5 Track Pin 24.1 2 PC60-6 Master Bush [...]

Bucket Teeth Pins & Retainers

Bucket Teeth Pins & Retainers Here are more models for bucket teeth pin & retainer for you to choose Model Unit (Kg) Model Unit (Kg) Model Unit (Kg) 8E6028 0.05 5K1425 0.02 8E2229 1.5 1U4208 0.05 9J9600 0.5 8E2230 0.35 2011238 0.06 6J8811 0.76 4T2479 0.52 6Y3228 0.1 3G0500 1.1 9W2678 0.25 8E6258 0.11 8E6209 [...]

Motor Grader Blades Cutting Edges 5D9558 5D9559

Motor Grader Blades Cutting Edges 5D9558 5D9559 5D9558 DBC Grader Blade 1828*203*19 13*5/8 5D9559 2133X203X19 15 5/8" Grader blade Motor Grader Blades Cutting Edges Material High-carbon steel (C80); Boron steel (30MnB) Part No. Color Yellow or Customer Required Size 1828mm(6ft)*152mm*16mm 13holes*5/8" Logo Customer Required G.W. 30.3 kg Hardness HB280-500 N.W. 32.3 kg MOQ 1 pc [...]

5D9558 19mm Thickness Cutting Edge Grader Blade

5D9558 19mm Thickness Cutting Edge Grader Blade 5D9558 1828X203X19mm 13 holes 5/8" Heat Treated 6’ x 8” x 3/4” w/5/8” Bolts Additional information Weight 50 kg Dimensions 1828 × 203 × 19 mm Product Category Graders Hardware Size 5/8" Blade Thickness 19mm Blade Shape Curved Hole Spacing 152.4mm Bolt Holes 13 5D9558 DBC Grader Blade [...]

How to Avoid Bucket Teeth Damaging Due to Abrasive Wear

How to Avoid Bucket Teeth Damaging Due to Abrasive Wear When an excavator is digging, the wear volume loss of the outermost bucket teeth at both sides is 30% higher than that of innermost one. After being operated for a period, the innermost and outermost bucket teeth are better to exchange their positions; Operator should [...]

Difference Between Forged and Cast Bucket Teeth

Difference Between Forged and Cast Bucket Teeth Although the bucket tooth is a small part of earthmoving machine and the price of which is relatively low, but strength and durability are the undoubted factors that must be considered when choosing. Among various types of bucket teeth, usually forged bucket teeth and cast bucket teeth both [...]

Bucket Teeth Applicable Earthmoving Equipment

Bucket Teeth Applicable Earthmoving Equipment Brand Machine Model Part No. KOMATSU PC60, PC100, PC200, PC300, PC400, etc. 205-70-19570RC, 207-70-14151TL, 208-70-14152RC, etc. CATERPILLAR CAT200,CAT320, CAT325, CAT330, etc. IU3352RC, 7T3402TL, IU3452RC, etc. HYUNDAI R200, R225, R290, etc. E161-3027RC, 61N6-31310RC, 61N8-31310RC, ect. VOLVO VOLVO210, VOLVO360, etc. 14530544RC, T55RC, V360TL, etc. DAEWOO/DOOSAN DH220, DH300, DH360, etc. 2713-1217RC, 2713-1219TL, 2713- [...]

Supply Bucket Teeth And Adapters

Supply Bucket Teeth And Adapters Bucket Teeth S/N Part No. Model U'W (KGS) 1 20X-70-23161 PC100 2.5 2 20X-70-23161RC PC100 2.5 3 205-70-19570 PC200 4.4 4 205-70-19570RC PC200 5.3 5 205-70-19570RC PC200 5.8 6 205-70-19570TL PC200 5 7 207-70-14151 PC300 6.8 8 207-70-14151RC PC300 8.5 9 208-70-14152 PC400 10.2 10 208-70-14152RC PC400 14 11 208-70-14152TL [...]

WEAR RESISTANT BUCKET TEETH

WEAR RESISTANT BUCKET TEETH Top-quality Wear Resistant Bucket Teeth from HCEPARTS Wear resistant bucket teeth have an important role to play in both the mining and construction industries. They are accessories used with ground engaging machinery and equipment, and designed to handle heavy loads and impacts within heavy duty conditions. Choosing the right bucket teeth [...]

Where to Find the Right Bulldozer Blades

Where to Find the Right Bulldozer Blades As is the case with any tools, you will need to ensure that you have the right bull dozer blades for the task at hand and for the equipment that you are using. To ensure that your machine applications are efficient, you will need to have access to [...]

Construction Machinery Spare Parts For Russia Customer

Construction Machinery Spare Parts For Russia Customer ZL30-630006/4021000199             Втулка (40*50*45) гидроцилиндра поворота ZL50G Z3.3-12/250100280             Втулка (6шл/10шл) вала гидравлического насоса             Гидроцилиндр опрокидывания ковша (L тела 720 мм, d отв.- 95 мм) (HSGF-200*100*545-1085) SDLG 4120001326             Гидроцилиндр опрокидывания ковша (Lтела 830 мм, d отв.-50 мм) (HSGF-125*70*612*1132) SDLG952 250100220             Гидроцилиндр поворота LW300F XGYG01-042/803004098             [...]

XCMG SHANTUI SDLG PARTS TO RUSSIA

XCMG SHANTUI SDLG PARTS TO RUSSIA 4120002027/DXS-00/8030041             Джойстик управления гидросистемой SDLG (A) 4120000009             Насос гидравлический CBGJ2080B/JHP2080 (6 шлицов) одинарный SDLG/LW500/ZL50 803004063             Насос гидравлический CBGJ3100 (14 шлицов) одинарный ZL50 (A) 4120000401             Насос гидравлический CBGJ3100A (6 шлицов) Ø 34 SDLG/LG левое вращение 4120001715             Насос гидравлический CBGJ3160L (6 шлицов) SDLG952 41200001803             Насос [...]

SDLG LG936 LG936L SPARE PARTS

SDLG LG936 LG936L SPARE PARTS 4110000613 FUEL FILTER 29020015351 OIL FILTER 4110000507 OIL FILTER TRANS. 4110002520017 PLATE FLEXIBLE TRANS. 4110002520016 SHIM TRANS. 4110002520019 SHIM TRANS. 4110002520015 ATTACHING LINK 4110002520012 COVER TRANS. 4021000018 BEARING TRANS. 4110002520011 TURBINE TRANS. 4110002520010 WASHER TRANS. 4110002520009 STATOR TRANS. 411000252008 WASHER TRANS. 4021000076 BEARING TRANS. 411000252007 PUMP TRANS. 4110002520006 GEAR TRANS. [...]

Bulldozer Ripper

Bulldozer Ripper We provides a range of ripper attachment fit bulldozer of CATERPILLAR, KOMATSU, SHANTUI on the market,including single-shank and multi-shank rippper. FEATRUE FOR THE RIPPER ATTACHMENT FROM US (1)Our quality is rock solid using the best raw materials available. (2)Our sophisticated manufacturing process includes cutting,welding,grinding,painting and packaging our attachments. (3)After enduring a meticulous inspection [...]

Ripper Shanks

Ripper Shanks NO. DESCRIPTION OEM PART NO. MODAL BRAND WEIGHT HARDNESS 1 Ripper Shank 8E5347 D8N D8R Single shank Caterpillar 365 46~50 HRC 2 8E5346 D8N D8R Multiple shank 289 46~50 HRC 3 8E5340 D8N D8R Deep ripper shank 450 46~50 HRC 4 8E5342 D8L Single shank 345 46~50 HRC 5 8E5341 D8L Multiple shank [...]